Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richardson
Gate parts and welding in Richardson usually break down to one of three jobs: a hinge that’s torn loose, a post that’s heaved out of line, or a bottom rail that’s rotted through from sitting too close to our black-clay soil. We show up with the welding rig in the truck and fix the gate where it stands in your driveway, not hauled off to some shop across the county. If you need a hinge replaced this afternoon or a slide-gate conversion quoted before the HOA meeting, call (936) 296-2568 and you’ll get a live person, not a voicemail.
We work Richardson’s older neighborhoods constantly. Canyon Creek, Sherrill Park, the Heights of Eldorado. Those streets have specific gate problems, and after seeing enough of them you stop guessing and start knowing exactly what’s wrong before you even park the truck.
Why Gatewood Fence & Gate Is Richardson’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and the name on the shop is the same name on the invoice. That matters here. Richardson homeowners have a long memory, and they’ve been through the bait-and-switch quote game with outfits that answer the phone in one state and send a stranger from another. We don’t do that. We’re owner-operated, we’re licensed, and the person who answers your call is the person family you’ll deal with all the way through the job.
Richardson customers call us because they’ve seen our work up the street, or their neighbor handed them our number. A fair number of the gates in Sherrill Park and older east Richardson carry our welds. When you’re on your third or fourth gate repair in the same subdivision, you learn which posts were set wrong in the 1970s and which hinges the original builders cheaped out on. That’s not information you get out of a franchise training manual. It comes from years of pulling up to the same curb lines and seeing the same failure patterns.
We answer the phone 24/7, but for most parts and welding work in Richardson we can be there the next day, sometimes same day if the schedule lines up. If the gate is off its hinges and won’t close, call. We’ll figure out timing on the spot. Every job carries the 90-Day Done Right Promise in writing, and there’s no trip charge inside the county.
Our Gate Parts & Welding Services in Richardson
We don’t swap parts that don’t need swapping. That’s the whole point. A sagging gate usually isn’t a panel problem, it’s a hinge-post problem, and no amount of shiny new hardware fixes a post that’s leaning out of level. Our Gate Parts & Welding service is built around fixing the root cause, not masking it.
Hinge Replacement
Richardson’s black-clay soil heaves every season, and hinge welds take the brunt of it. A hinge that was square in March is fighting the post by August. We cut out the old hardware, weld in new hinges, and re-hang the gate so it swings true. For the older Canyon Creek wood gates, we almost always find the hinge screws pulling out of rotted wood, which means the fix isn’t just a new hinge. It’s a new post or a welded steel plate that gives the hinge something solid to bite into.
Post Replacement
A gate sags in the hinge post, not in the middle. In Richardson, where drought years followed by heavy rain send the soil through dramatic shrink-swell cycles, posts heave, lean, or sink, and once the post moves, the gate will never close right again. We dig out the old footing, set a new steel post in concrete deep enough to get below the active clay zone, and weld the hinges back on. This is the repair that fixes the gate for good, not for a season.
Rail Repair
The bottom rail on a wood gate rots from moisture first. In Richardson, it’s worse, because our clay soil wicks water upward all year. We replace rotted rails with steel, pressure-treated wood rated for ground contact, or powder-coated aluminum. When we replace the rail we also check the post, because if the rail rotted, the post that’s been drinking the same moisture is probably not far behind.
Custom Welding
Some gates were built for a different house, or a different time, and the part you need simply doesn’t exist on a shelf. We cut, shape, and weld custom brackets, frames, and reinforcement in the driveway. If a shared driveway in Richardson means you need a slide gate where a swing gate used to be, we’ll weld the new track, set the posts, and hang the gate so both houses keep their access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
When we work on operators and access hardware in Richardson, the brands are usually FAAC, BFT, Linear, or Viking. We’re certified to service all of them, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because Richardson’s Telecom Corridor runs on commercial-grade automation, we keep a deeper parts inventory than the average gate shop. That means less waiting on a part to ship from a warehouse. If your Richardson gate operator stops responding, there’s a good chance we have the board, arm, or sensor on the truck or at the shop and can have it running the same day.
Common Gate Parts & Welding Problems We See in Richardson Homes
- Hinge post heaving from clay soil. Richardson’s black clay expands when wet and shrinks when dry. After a drought breaks with heavy rain, posts push up and out of level. The gate then binds, drags, and eventually the hinge welds shear.
- Rotted bottom rails on 1970s wood gates. In Canyon Creek and Sherrill Park, the builder-installed Douglas fir bottom rails sat less than an inch above grade. The soil wicks moisture up into the wood year-round. By the time the gate sags and won’t latch, the rail is usually gone and the hinge post needs replacing too.
- Ice-storm damage to ornamental iron. Richardson sees more ice than Dallas proper, and the added weight snaps older iron pickets and bends aluminum frames. We cut out the broken sections, weld in new material, and match the finish as close as the original age allows.
- Slide-gate retrofits on tight Richardson lots. Many older Richardson properties have driveways too narrow for a full swing radius, especially when a gate was installed decades ago before cars got wider and fences got tighter. We convert swing gates to slide gates while keeping vehicle and pedestrian access open throughout the work.
Pricing for Gate Parts & Welding in Richardson, TX
A hinge replacement in Richardson typically runs $150 to $350 per hinge, depending on whether the post needs reinforcement. Post replacement runs $400 to $900 for a single steel post set in concrete, and most Richardson soil conditions mean we go a foot deeper than the old footing. Rail repair usually lands between $250 and $600, with pressure-treated wood on the low end and powder-coated steel on the high end. Custom welding generally starts around $200 for a simple bracket and runs up from there for full slide-gate conversions or commercial-frame work. Rail conversions from swing to slide, like the one we did recently in the Sherrill Park area, typically come in between $1,800 and $3,400 including the operator, depending on gate length and access-control needs.
You get a written price before any work starts, and that’s the price. No trip charge inside the county. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (936) 296-2568 and we’ll quote it straight.
We Also Serve Cities Near Richardson
Most of our Richardson customers are right here along the US-75 corridor, but we also work regularly in Addison, Plano, Dallas, and Coppell. If you’re a few miles outside Richardson and the gate’s down, call anyway. The drive from our Dallas-Fort Worth area office is short, and the phone is answered by a human no matter which city you’re calling from. Find more on the Gate Parts & Welding in Richardson page, or just call us.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richardson
The two biggest causes are Richardson’s black-clay soil and the original builder-grade materials used in 1970s housing. Clay swells and shrinks with every wet-dry cycle, pushing posts out of line and shearing hinges. The older wood gates have untreated Douglas fir bottom rails set near grade, so they rot from constant moisture wicking, and once the post rots too, the hinges have nothing left to hold. Call (936) 296-2568 and we’ll tell you honestly whether you need a hinge, a post, or both.
Yes. We keep the pedestrian gate functional and the vehicle lane open as much as possible while we work. In the Sherrill Park area we recently converted a builder-installed 1970s wood swing gate to a slide gate after the bottom rail rotted from clay moisture. We replaced the hinge post and footings, welded a new steel frame, and installed a new LiftMaster slide operator with safety photocells, all while both houses behind the shared driveway kept their access. Free estimates, so call (936) 296-2568 and we’ll walk your gate and give you a written number.
We pull the old post, excavate the old footing, and pour a new one deep enough to reach below the active shrink-swell zone. The new post is steel, set in concrete, and welded for the hinges, which means it will not move with the seasons. No amount of shimming fixes a heaved post in Richardson. If the post moved, replace it. If you’re not sure, call (936) 296-2568 and we’ll check it with a level.
Yes. We routinely service automated gates and access-control hardware along the US-75 corridor in Richardson, including FAAC, BFT, Linear, and Viking operators with Wiegand card-reader wiring and loop detectors. When older wiring or a loop detector fails, we weld new post bases and rehang the gate while keeping card-reader and vehicle lanes continuously operable. We stock the commercial parts that a purely residential shop would have to order.
Ice adds sudden weight-loading stress to ornamental iron that’s already thinned from decades of North Texas heat and humidity. Richardson catches more icing than southern Dallas County, so those gates fail more often up here. We cut out the snapped pickets or bent sections and weld in fresh material, then re-coat it so the repair blends into the original gate. Call (936) 296-2568 for an exact quote.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Richardson since the company’s founding in 2001.