Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Addison
Gate parts and welding in Addison is almost always a commercial job. This city runs on apartment corridors along Quorum Drive and Belt Line Road, office parks, and restaurant strips where a downed gate means hundreds of vehicle cycles backed up by noon. We keep a stocked truck for exactly that work: hinge posts, racks, pinions, rollers, operators, and a full welding rig that does the repair on site, not back at some shop across town. If a slide gate is binding, sagging, or off its track anywhere in Addison right now, call (936) 296-2568 and Hal or his crew will get eyes on it today.
Why Gatewood Fence & Gate Is Addison’s Preferred Gate Parts & Welding Company
Addison is dense, and dense means gates work hard. The apartment complexes off Quorum Drive and the commercial strips along Belt Line Road easily push 300 to 600 vehicle cycles per day through a single entrance. That kind of duty cycle exposes weak welds, undersized posts, and tired rollers within a season or two. Property managers here have learned that a gate shop that mostly does residential ornamental iron is guessing. We have been owner-operated since 2001 and Hal Gatewood’s name is on the shop, on every invoice, and on the work. Add that to a 90-Day Done Right Promise in writing and it explains why Addison property managers keep our number saved.
The difference is repair-first. We do not haul a gate off to a fab shop because yours is welded in place. We fix it in your driveway, in your parking lot, at your loading dock. And the person who answers your call at 2 a.m. is a live person who knows gates, not a voicemail. For Addison, we coordinate dispatch and scheduling from the brand’s Dallas-Fort Worth office, and crews serve Addison locally.
- On-site welding: the gate stays where it is; we bring the weld.
- Live person, 24/7: call (936) 296-2568 and a human answers.
- 90-Day Done Right Promise, stamped in writing on every job.
- Flexibility for shared rights-of-way: we know Addison’s tight sites and keep vehicle and pedestrian access moving during the work.
Our Gate Parts & Welding Services in Addison
These are the jobs we run in Addison more than any others. Each one gets the local conditions worked into the fix, not papered over.
Hinge Replacement
On Addison’s older apartment complexes, hinge posts set in Blackland Prairie clay heave and pull out of plumb. The gate sags at the latch, then the hinges carry load they were never designed for. We replace the hinge and the post together when the post has moved. Fix the panel without the post and you will fix it twice. That is the honest version, and Addison property managers have heard it from us more than once.
Post Replacement
This is the core of gate welding work across Addison. In the clay soil under Quorum Drive and Belt Line Road, a post set at 30 inches in 1988 has almost certainly moved. We cut the old post at grade, dig a deeper footing, set the new post in concrete, and weld the gate hardware back true. Most post replacements on slide-gate systems run $600 to $1,400 depending on post size and what else the shifted post took with it.
Rail Repair
Slide gates live and die by their rail. When clay heave throws the track out of alignment, the gate binds, the rack and pinion chew at each other, and the motor pulls more amps until something fails. We straighten where straightening works, replace rails and roller carriages where it does not, and re-rack the pinion so the operator is not fighting the gate. On Quorum Drive, rail repair is the most common call we get after a stormy spring.
Custom Welding
Some Addison sites cannot fit a standard swing gate. Shared driveways, narrow rights-of-way, restaurant service alleys off Belt Line Road. When a swing gate will not work, we fabricate and weld a slide gate to fit the actual opening, including the rail, the receiver post, and the operator mount. All on site. No off-the-shelf guesswork. If a property needs custom steel work around a loading dock or a pedestrian gate with a very specific swing path, we weld it to fit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We stock parts locally for Addison complexes running LiftMaster, FAAC, and BFT operators. A lot of the apartments along Quorum Drive were built with FAAC slide-gate operators in the late 1980s and 1990s, and many of those are still in service today, which is a testament to the original build and a headache for the property manager who inherited one. We also work on Linear and Viking systems, and we keep the common failure parts on the truck so a service call does not turn into two. If it takes a board, a limit switch, a loop detector, or a hinge set, we usually have it when we roll up.
Common Gate Parts & Welding Problems We See in Addison Homes
- Clay-heaved post footings: the Blackland Prairie soil under Addison swells in wet springs and shrinks in 105-degree summers. Posts move. Gates sag and bind. We reset the post deeper and move on.
- UV-degraded nylon rollers: at this latitude, nylon rollers crack and shatter faster than manufacturer ratings suggest. A shattered roller drops the gate onto the track and shears hinge welds. We replace rollers with higher-durability material on high-cycle gates.
- Track misalignment from seasonal movement: when the post moves even half an inch, the rack and pinion bind and the operator strains. Re-aligning the rail and re-racking the pinion removes motor strain before it costs you an operator.
- Older operators wired without a dedicated neutral: several original Viking and FAAC installs we see along Quorum Drive lack a neutral, which cooks modern access control boards. The gate itself may be fine; the wiring is the problem, and fixing it means a code-compliant rewire before the new board will work.
Pricing for Gate Parts & Welding in Addison, TX
Here are the ranges we quote in Addison. A hinge replacement on a pedestrian or light vehicular gate typically runs $280 to $600 per hinge, including the weld and re-hang. Post replacement on a slide gate is $600 to $1,400. Rail repair, depending on how much rail and roller carriage work is needed, is $450 to $1,200. Custom welding for a fabricated slide gate starts around $1,800 and goes up with the opening width and the operator package. Roller replacement alone is usually $180 to $400 per gate. Every price is quoted and agreed before any work starts. If you have a written estimate from another shop, bring it to us for a free second opinion. We also take $40 off any repair over $200, senior and veteran customers get 10% off permanently, and there is no trip charge inside the county. Call (936) 296-2568 for an exact quote.
We Also Serve Cities Near Addison
Addison keeps us busy, and we cover the surrounding cities as well. Richardson and Coppell apartment corridors see the same clay heave and high-cycle gate wear. Plano and Dallas properties call us for the same on-site Gate Parts & Welding work, and we route crews from Addison out to those areas daily. Whether you are managing a gate in Addison or one just outside the line, the same repair-first standard applies.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Addison
Mostly the soil. The Blackland Prairie clay under Quorum Drive expands and contracts dramatically between wet North Texas springs and dry 105-degree summers, which slowly heaves post footings out of plumb. When the post moves, the track moves, and the gate rides off. We reset the post in a deeper footing and re-align the rail, and the problem stops recurring. Call (936) 296-2568 and we will take a look at your site.
We work one side of the gate at a time and weld in place, keeping the gate on its remaining hardware while the post is reset. On most Belt Line Road properties, we can maintain at least one lane of vehicle access during the work. For a full gate-out repair, we schedule around your peak hours.
You can usually replace just the rollers at first. A roller replacement on an older FAAC slide gate typically runs $180 to $400. But if the rail itself is worn, gouged, or bent from the gate running on failed rollers, you will spend more fixing it twice than doing the rail rebuild once. We will show you the wear before you spend a dollar.
Almost always, the original operator was wired without a dedicated neutral. The new access board sees an irregular return path and faults or blows fuses. A code-compliant rewire to add the neutral is the fix, and we do it on site before installing the new board. Call (936) 296-2568 and we will test the circuit before anything else.
Yes. Shared driveways in Addison’s tighter lots often have no room for a swing radius, so we weld a slide gate to fit the actual opening, including rail, receiver post, and operator mount. It is measured, fabricated, and welded on site, and every job carries the 90-Day Done Right Promise. Estimates are free; call (936) 296-2568 and we will come measure.
Contact Gatewood Fence & Gate in Addison
If your gate is down off Belt Line Road or binding on Quorum Drive, call us before it gets worse. The phone rings to a live person 24 hours a day: (936) 296-2568. We will give you an honest, written price before any work starts, and the person who shows up is part of Hal’s crew, not a rotating cast. Free estimates, free second opinions on written quotes, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Addison since the shop opened in 2001.