Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dallas
Gate parts and on-site welding in Dallas means dealing with a soil condition most of the country never sees. Our Gate Parts & Welding crews fix hinges, posts, rails, and cracked welds on gates that have been fighting Dallas black clay for decades, and we do it without hauling your gate to some shop across town. From Preston Hollow to Far North Dallas, gates drag in August not because the operator died, but because the post moved. Call (936) 296-2568 and a live person answers, day or night. Hal Gatewood has been at this since 2001, and his name is on every invoice.
Why Gatewood Fence & Gate Is Dallas’s Preferred Gate Parts & Welding Company
Dallas homeowners have been burned before. A national brand sends a technician who quotes one price on the phone, then hands over a work order with a different number at the door. We do not do that. The price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing. If it is not right, we come back. No runaround, no re-quoting, no arguing about what the warranty covers.
The person who shows up at your driveway wears a Gatewood uniform, has passed a background check, and knows Dallas soil. That matters more than people think. A gate tech from a stable-soil city looks at a binding gate and starts adjusting hinges. Hal looks at the post footing first, because in Dallas the post is usually the culprit. That local knowledge is not something you get from a third-party call center. You get it from an owner-operator with a published address and a license number anyone can look up.
Our Dallas customers call for a lot of reasons: hinges worn out on a 1990s Preston Hollow swing gate, a cracked weld on a tubular steel rail in Bluffview, a slide gate that worked in April and won’t latch by August. The reviews mention the same things over and over: we answer the phone, we show up in the window we promised, and we fix the actual problem instead of selling a new gate. Around here, that is how you earn the next call when the other gate on the property starts acting up.
Our Gate Parts & Welding Services in Dallas
Hinge Replacement
Hinges on Dallas gates take a beating that hinges in Arlington or Fort Worth get a milder version of. Black clay heave tilts posts, which forces hinge pins to carry weight they were never designed for. A ball-bearing hinge that should last fifteen years is on borrowed time after a few wet-dry seasons on moving soil. When a Preston Hollow swing gate drags on the driveway, the hinge is often the visible failure but the post is the hidden one. We inspect both before we touch anything, and we only replace hinges that actually need it. A hinge swap on a single residential swing gate in Dallas typically runs $180-$420, depending on gate weight and whether we are doing one hinge or a full set.
Post Replacement
This is the job that separates a Dallas gate specialist from a parts-swapper. A properly set 4-inch steel post can shift two inches laterally in a single wet-dry season in the black gumbo. When that happens, no amount of hinge adjustment fixes the gate, because the geometry is shot. We dig out the old post, inspect the footing, pour a deeper reinforced footer where the soil demands it, and set a post that will stay put longer. Post replacement for a typical residential gate in Dallas runs $500-$1,200, with the final number driven by footer depth, soil condition at the specific spot, and whether we are dealing with a light pedestrian gate or a heavy double swing.
Fix the panel without the post and you’ll fix it twice. That’s not an upsell. That is thirty years of watching Dallas gates fail the same way, every year, after the spring rains.
Rail Repair
Custom ornamental gates from the 1980s through the 2000s are everywhere in Preston Hollow, Bluffview, and University Park. Those gates were built heavy, which is why so many are still standing. But the rails crack, especially at welded joints near the hinge side. Dallas heat accelerates the problem: hollow-tube iron frames expand and contract through a 60-degree annual temperature swing, and a small crack becomes a structural failure faster than most homeowners expect. We weld on site, in your driveway, so the gate stays where it is. No hauling, no waiting two weeks for a shop. Rail repair and crack welding in Dallas typically runs $150-$400 depending on crack location, access, and how much grinding and reinforcement the weld needs.
Custom Welding
Not every gate needs a new part. Sometimes it needs a weld that matches the original work, especially on older ornamental iron where the original welds were done by hand and a replacement panel would look wrong. Hal welds on site, and he has been doing it since before most of these gates went in. Custom welding work in Dallas runs $120-$350 for a typical repair, and we will always tell you honestly if the metal is too thin, too corroded, or too far gone to weld safely. When replacement is the cheaper answer over the next five years, we say so. Our goal is to fix your gate once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear, and we stock common parts for those operators so Dallas customers are not waiting on a ground shipment from three states away. Older Dallas gates from the 90s and 2000s often run FAAC or LiftMaster operators, and those units were built with plastic gears and control boards that crack under sustained Dallas heat. We keep replacement boards, limit switches, capacitors, and gear kits on hand for the brands Dallas actually has. If your operator has a nameplate we recognize, we can usually diagnose it on the spot and quote repair versus replacement before we leave the driveway.
Common Gate Parts & Welding Problems We See in Dallas Homes
- Post heave from black clay. Spring rains swell the soil, summer drought shrinks it, and gate posts tilt or shift laterally. By August, a gate that latched perfectly in April binds on the driveway or misses the catch entirely.
- Legacy operators on borrowed time. Operators installed during the 1980s-2000s building boom have plastic gears and control boards that were not designed for 100°F-plus summers. Heat cracks the board, and the next hard freeze finishes it.
- Worn hinge pins and sagging posts on ornamental gates. Preston Hollow and Bluffview have a high density of custom wrought-iron and tubular steel driveway gates from the 80s and 90s. The hinges are often original, and the posts have been moving for decades.
- Safety photocells and sensors out of alignment. When the post moves, the photo eye moves with it. A gate that stops midway and reverses usually has a sensor that slipped out of alignment because the post it was mounted to shifted.
Pricing for Gate Parts & Welding in Dallas, TX
Here is what Dallas homeowners should expect to pay. Hinge replacement on a single residential swing gate runs $180-$420. Post replacement runs $500-$1,200, depending on footer depth and soil conditions at your property. Rail repair and crack welding runs $150-$400. Custom welding runs $120-$350. Gate rollers for slide gates run $90-$250 installed. Latch and lock repair or replacement runs $80-$220.
Every quote is given before any work starts, and that number does not change when the job is done. That is a promise. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside Dallas County, and a permanent 10% discount for seniors and veterans. Call (936) 296-2568 and tell us what the gate is doing. We will give you a straight answer and a straight price.
We Also Serve Cities Near Dallas
Our Gate Parts & Welding in Dallas service area covers the city itself plus the nearby communities where Dallas homeowners’ families often live: Irving, Duncanville, Addison, and Richardson. If you are just outside the city line and the gate is dragging, call (936) 296-2568. We will tell you honestly how soon we can get there and what the trip looks like before anyone gets in the truck.
Key Takeaways for Dallas Homeowners
- Dallas black clay moves gate posts laterally by inches in a single season, and that movement is the hidden cause of most binding and latching problems.
- Hinge and rail failures on older Preston Hollow and Bluffview gates are usually a symptom of post movement, not a reason to replace the whole gate.
- Legacy LiftMaster and FAAC operators from the 80s-2000s crack under heat, and we stock the parts Dallas homes actually need.
- Every job carries the 90-Day Done Right Promise in writing, and the price is agreed before any work starts.
- Call (936) 296-2568 and a live person answers. 24/7. Not a voicemail, not a call center.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dallas
Sometimes, yes. If the post is still plumb and the concrete footer is intact, we can re-hang the gate on new ball-bearing hinges and grind out any misalignment at the hinge weld, which in Dallas typically runs $180-$420. But if the post has shifted in the black clay, no hinge work will hold for long. We will dig or probe the footer to confirm what is happening before we recommend anything. In Preston Hollow we pulled back a 1990s ornamental steel gate that was dragging in August. The operator was a LiftMaster with a burned-out capacitor, but the real issue was the hinge post: a properly set 4-inch post had shifted over two inches in the black gumbo. We replaced the post with a deeper, reinforced footer, re-hung the gate on new ball-bearing hinges, and rebuilt the rack and pinion alignment on the old Viking slide gate next to it so both entrances cycled clean. Call (936) 296-2568 and we will tell you which situation you have.
If your gate predates the late 1990s, it probably lacks the monitored safety photocells, reversing edges, and entrapment protections current standards require. A gate that reverses when it hits an obstruction is better than one that does not, but it is still not compliant. We inspect older gates in Dallas regularly, and the honest answer is that some 80s and 90s systems can be retrofitted with current safety sensors and a new control board, while others have operators so obsolete that even used parts are hard to find. The retrofit decision depends on the operator model, the gate weight, and what safety equipment is already there. Call (936) 296-2568 for a straight answer on your specific gate.
Because the post that supports the track moved. Dallas black clay swells with spring rain and shrinks hard in summer drought, and a post that was plumb in April can be off by an inch or two by August. That puts the rail out of line, the rollers bind, and the gate drags. It is one of the most common calls we get across Dallas all summer. The fix is usually rail realignment and roller replacement in the short term, with a deeper post footer if the movement repeats year after year. Roller replacement in Dallas runs $90-$250 installed. Call (936) 296-2568 and describe what the gate does. We will tell you what to look at before we even schedule the truck.
Often, yes. FAAC and DoorKing operators from the 90s and 2000s are well-built units, and many are still serviceable with a new capacitor, limit switch, or gear set, especially if the gate itself was the real problem. We keep FAAC replacement parts in stock for the models Dallas homes actually have, and we will not push a new operator if the old one has life left. That said, if the control board is cracked from Dallas heat cycles and the replacement board costs nearly as much as a modern operator with current safety features, we will show you the numbers and let you decide. The decision should be based on what the parts cost, not on what we would rather sell you.
In most cases, yes. We weld on site, in the driveway, so the gate never leaves your property. The repair is safe when the surrounding metal is sound enough to hold a weld and the crack has not propagated through a critical load-bearing joint. If the rail is too thin or the corrosion has eaten the metal from the inside, welding will not hold, and we will say so before we waste your money. Rail repair and crack welding in Dallas runs $150-$400, and the 90-Day Done Right Promise covers every weld we make. Call (936) 296-2568 and describe where the crack is. We will tell you what we think before we schedule the appointment.
Call Gatewood Fence & Gate for Gate Parts & Welding in Dallas
You can keep guessing why the gate drags in August, or you can call someone who already knows the answer. Dallas black clay moves posts, wears hinges, and kills operators that were never built for this heat. Hal Gatewood has been fixing those gates since 2001, and he will give you the same straight answer he gives his neighbors: fix the post, replace what is actually worn, and leave the gate better than it was. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job. Call (936) 296-2568 or visit the shop and look us in the eye. The name is on the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dallas since 2001.