Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Plano
If your Plano gate is sagging, dragging, or the hinges have given up, the fix usually comes down to parts that actually match what was installed and a welder who understands why it failed in the first place. We’re Gatewood Fence & Gate, and we’ve been repairing and rebuilding gates since 2001. Hal Gatewood’s name is on the shop, his address is published, and when you call (936) 296-2568, a live person picks up, day or night. Not a voicemail. Not a call center three states away. Somebody who knows Plano gates.
Most Plano gate repairs don’t need a whole new gate. They need the right hinge, a stronger post footing, a welded rail, or a latch that the HOA will actually approve. That’s the work we do, and we do it with the gate still sitting in your driveway. Here’s what matters in Plano specifically: your neighborhood’s gates were built in a very particular era, on very particular soil, and that combination creates failures you won’t see in Richardson or Coppell. We’ll get into the details below.
Key Takeaways
- Plano’s expansive black clay soil heaves and tilts concrete-set gate posts, causing hinge-bind and rail tears that generic part swaps won’t fix.
- Many Plano HOA gates from the 1980s-1990s boom used non-standard ornamental hardware that requires welding or fabricating period-matching parts.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back.
- Upfront pricing, no trip charge inside the county, free estimates. Call (936) 296-2568.
Why Gatewood Fence & Gate Is Plano’s Preferred Gate Parts & Welding Company
Plano homeowners have a specific problem that generalist gate companies don’t prepare for. The city’s master-planned HOA boom from the 1980s and 1990s put ornate wrought-iron gates on thousands of homes, and those gates are now 25 to 45 years old. They’re hitting the end of their service life at roughly the same time, all across the city. A national company that sends someone out with a truck full of off-the-shelf panels will tell you the gate needs replacement. We’ll tell you the post needs resetting and the lower rail needs a new weld, because that’s usually the truth.
We’ve been at this since 2001, and the person who shows up to your Plano home is part of Hal’s crew, background-checked and uniformed, not a subcontractor we met last week. Hal certified to service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters in Plano, where different phases of the same subdivision often have different operator hardware. We’re the team behind Gate Parts & Welding for the whole DFW area, and we treat Plano like the priority market it is. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Plano locally throughout the week.
Our reputation with Plano customers is built on something simple: the estimate you get is the price you pay. We quote it, we agree on it before any work starts, and the invoice doesn’t change at your door. No trip charge inside the county. Free second opinion on any written estimate. And every job, from a single hinge to a full post replacement, carries the 90-Day Done Right Promise, stamped in writing. If it’s not right, Hal comes back. No runaround.
Our Gate Parts & Welding Services in Plano
Hinge Replacement
Hinge replacement in Plano is rarely as simple as unbolting an old hinge and putting on a new one. The original hinges on many 1980s-1990s HOA gates were decorative cast pieces with non-standard bolt patterns. A 1993 wrought-iron side gate in the Willow Bend area often has hinge plates that no current catalog matches. We weld in new barrel sleeves, re-drill mounting plates, or fabricate hinge straps that match the original profile so the HOA architectural review has nothing to flag. A proper hinge job also means checking the post it mounts to. If the post has moved, new hinges won’t hold.
Post Replacement
This is the big one in Plano. The city sits on expansive black clay that shrinks during multi-month droughts and swells after heavy spring rains. Concrete-set gate posts don’t stay plumb under those conditions. A leaning post throws the gate leaf out of level, which binds the hinges, tears the lower rail welds, and knocks safety photocells out of alignment. Post replacement here means digging out the old footing, resizing the hole, resetting with proper drainage, and frequently reinforcing the post with welded steel. We do it on site, and we don’t reuse a footing that’s already failed once.
Rail Repair
A torn or cracked lower rail is the most common visible injury on Plano gates, but it’s usually a symptom. The post moved first. The rail tore because it was absorbing flex the post used to carry. We grind back the broken weld, sleeve the rail internally where the metal allows, and weld it with a gusset plate that prevents the same stress concentration from re-cracking. If we just re-weld the same joint without addressing the post, you’ll call us again in eighteen months. Fix the panel without the post and you’ll fix it twice.
Custom Welding
Custom welding is where Plano’s HOA-era gates separate the real fabricators from the part-swappers. In neighborhoods around the Legacy corridor, architectural review boards require replacement gates to match original wrought-iron profiles and powder-coat colors exactly. That means a broken scroll, a snapped finial, or a damaged latch mount often can’t be replaced with an off-the-shelf piece. We fabricate the part from solid steel, match the profile, and touch up the powder coat so the repair disappears, including Ghost Controls service in Plano when specified. Hal has been welding on site since 2001, and he gets genuinely annoyed when he finds sloppy work somebody left behind. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
Plano gates run a huge mix of hardware because the city’s subdivisions were built in waves over two and a half decades. We service and stock parts for the brands Plano homeowners actually have on their gates, including LiftMaster, FAAC, BFT, Linear, and Viking. When your HOA community gate has a BFT operator from 2005 that won’t respond after an ice storm, we’re familiar with the failure patterns. When a newer home on the east side has a builder-grade Linear unit that never had the torque for a heavy ornamental panel, we know what’s undersized before we even open the case. Plano keeps us on our toes because the hardware spans three decades, and we keep parts in local stock to turn repairs around fast.
Common Gate Parts & Welding Problems We See in Plano Homes
- Non-standard HOA-era hardware: Plano’s 1980s-1990s HOA boom installed ornate wrought-iron gates with hinge and latch hardware that no off-the-shelf part matches. Repairing these requires welding and fabricating period-specific components that match original profiles, a niche skill rarely needed in cities with newer housing stock.
- Builder-grade operators failing early: The subdivision boom era put lightweight operators on heavy ornamental gates. Under frequent open/close cycles in HOA communities, those builder-grade units fail early. The fix is a stronger aftermarket motor and welded mounting plates, not another disposable unit.
- Clay soil heaving concrete-set posts: Plano’s black clay shrinks and swells with North Texas moisture cycles, tilting posts and throwing automatic openers out of alignment. This causes hinge-bind, rail tears, and photocell misalignment in ways sandier-soiled cities rarely see.
- Missing conduit runs on retrofit automation: We regularly see Plano homes where a previous owner added automation to a manual wrought-iron gate, and the original build had no conduit for power. Surface-mounted wiring fails HOA review unless it’s run through welded chase covers that match the gate’s finish.
Pricing for Gate Parts & Welding in Plano, TX
Hinge replacement in Plano typically runs $120 to $375 depending on whether we’re working with standard hardware or fabricating period-matching components for an HOA-era gate. Post replacement is the bigger job, usually $450 to $1,200 for a single post when you factor in the footing excavation, drainage correction, and welding reinforcement the clay soil demands. Rail repair with welded gusset reinforcement runs $180 to $450 per rail. Custom welding jobs are quoted by the piece, and a typical ornamental scroll or finial fabrication runs $80 to $250 per element. Full Gate Installation - Plano automation retrofit on a manual gate, including welded mounting and a proper power run, often lands between $900 and $2,200. Every price is quoted and agreed before we start work. Call (936) 296-2568 for a free estimate, no trip charge inside the county, and a written number that doesn’t change at the door.
We Also Serve Cities Near Plano
When we’re not in Plano, our crews work the neighboring cities regularly. We handle Gate Parts & Welding in Plano and the surrounding metro, covering Richardson to the south, Addison and Coppell to the west and southwest, and Dallas proper when the job calls for a Plano-level attention to detail.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Plano
Usually not. Many Plano HOA gates from that era used decorative cast hinges with non-standard bolt patterns and profiles that off-the-shelf replacements don’t match. We weld new barrel sleeves into the existing hinge leaf or fabricate period-correct replacement straps so the hardware matches the original profile and passes HOA architectural review. A standard hinge swap on one of these gates will either look wrong or fail early. Call (936) 296-2568 and we’ll tell you which one you have.
The welding isn’t the fix, but it’s part of it. A leaning concrete-set post in Plano’s expansive clay usually needs the footing re-dug, the hole re-sized with proper drainage, and the post reset in a way that resists future heaving. Then we weld reinforcement at the base where the post meets the footing, and often add a steel stiffener up the post’s hinge line. Reset first, weld second. Skip either one and the lean comes back. We quote post replacement and reinforcement together.
In most cases, yes. Builder-grade operators installed during Plano’s recent construction cycles are sized for light aluminum gates, but Plano HOA homes often have heavy ornamental steel panels. The motor strains under the load, burns out early, and sometimes strips the rack teeth. We install our Gate Motor & Opener in Plano systems with stronger aftermarket operators, weld reinforced mounting plates, and set the travel limits so the motor isn’t fighting the gate. The upgrade pays for itself in not replacing a cheap operator every few years.
We can do the job in a way that keeps your HOA review clean. The most common failure point is the power run: many manual gates built during Plano’s boom era had no conduit under the drive or walk. We run the power through welded chase covers that sit flush against the gate frame, painted or powder-coated to match, so there’s no exposed wiring for an architectural review board to flag. We’ll also match the operator arm placement to the original gate design and can integrate Gate Access Control in Plano per your HOA’s written requirements.
The sag is almost always in the hinge post or the hinge hardware, not in the panel itself. A gate sags in the hinge post, not in the middle, and that’s where we start. In Plano, the expansive clay soil has usually shifted the post just enough to drop the gate leaf at the latch corner. We reset or reinforce the post, replace or rebuild the hinge assembly, and then re-level the gate leaf. If the lower rail has started to tear from the flex, we weld that too. Show me the gate dragging and I’ll show you where it’s failing.
Call Gatewood Fence & Gate for Gate Parts & Welding in Plano
If your Plano gate is failing, don’t guess at the fix. Call (936) 296-2568 and talk to someone who has been doing this work since 2001. You’ll get an honest assessment, a written price before any work starts, and the 90-Day Done Right Promise on every job. $40 off any repair over $200, a permanent 10% discount for seniors and veterans, and a free second opinion on any written estimate. Hal’s name is on the shop, his address is published, and the phone is answered by a live person 24 hours a day, 7 days a week.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plano since 2001.