Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Far North Dallas
If you’re searching for gate parts and welding in Far North Dallas, you’re likely dealing with a sagging ornamental iron gate, a hinge post that’s pulling away from a brick pilaster, or an operator that runs but won’t move the gate. That’s what we do every day. Gatewood Fence & Gate has been owner-operated since 2001, and we weld on site in Far North Dallas driveways, HOA entry monuments, and Preston Road estates, so your gate never leaves your property. Call Hal at (936) 296-2568 and a live person answers, day or night. No voicemail maze, no call center three states away.
Far North Dallas is different from the newer suburbs north of it. The gates here were installed during the 1980s and 1990s building boom, and they’re now 30 to 40 years old. Hinges wear, welds crack, posts shift in the gumbo clay. We know these neighborhoods, these gates, and the HOAs that govern them. That local knowledge matters when a gate has to clear an architectural review before we touch it.
Why Gatewood Fence & Gate Is Far North Dallas’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. He’s been doing this since 2001, and the shop is down the road from Far North Dallas, not three states away. When you call about a gate that won’t close in Bent Tree, the person who answers likely knows the neighborhood and the style of gate you’re describing. Homeowners between 50 and 70 in this area have told us the same story for years: a national outfit quoted one price on the phone and showed up with a different number at the door. We price the job before work starts, in writing, and that’s the number you pay.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No runaround, no fine print. We also answer calls with a live person 24/7, which matters when a Prestonwood entry gate fails at 9:30 on a Saturday night and the HOA board president is on the phone.
Our Gate Parts & Welding team welds in your driveway. We don’t haul your gate to a shop, and we don’t swap parts that don’t need swapping. If a hinge post can be repaired rather than replaced, Hal will tell you that and explain why. That repair-first approach is why Far North Dallas homeowners keep our number.
Our Gate Parts & Welding Services in Far North Dallas
Hinge Replacement
In Far North Dallas, ornamental iron swing gates typically hang on barrel or weld-on hinges mounted to brick or stone pilaster columns. After 30 years of opening and closing, plus the constant swell-and-shrink of Blackland Prairie clay, the hinge pins wear oval and the weld holding the hinge to the gate frame develops hairline cracks. We cut out the old hinge, grind the frame clean, weld in a new hinge that matches the original style, and re-hang the gate so it swings true. A typical hinge replacement in Far North Dallas runs $180 to $420 per hinge depending on gate weight and access.
Post Replacement
The single most common failure we see in Bent Tree and Prestonwood is a hinge post that’s shifted. The 2022-2023 drought-rebound cycle pushed brick pilaster footings enough to bind gates mid-arc, and a gate bound against its post will eventually tear the weld at the hinge. We reset the post with helical piers where needed, re-level it, and weld the gate back into alignment. Post replacement and resetting in Far North Dallas typically runs $600 to $1,400 per post. If a mason is required for the pilaster itself, we coordinate that, so you don’t have to juggle two contractors.
Rail Repair
Far North Dallas’s wet-dry clay exposure accelerates corrosion at the lower hinge zone of ornamental iron rails and pickets. The bottom rail of a 40-year-old Preston Road estate gate often rusts from the inside out. We cut out the corroded section and weld in new steel matched to the original profile and finish. Rail repair for a corroded bottom section in Far North Dallas runs $250 to $650 per section.
Custom Welding
When a gate section is beyond repair, or an HOA asks for a period-correct match, we fabricate and weld on site. That includes matching ornamental iron scrollwork, picket spacing, and top-rail profiles found in 1980s Prestonwood and Bent Tree communities. Custom fabrication for a single gate section in Far North Dallas typically runs $500 to $2,000 depending on size and detail. We’ll show you the price before the first weld, and you’ll see the face who does the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Far North Dallas
We’re certified to service nine major gate brands, and the ones we see most often in Far North Dallas are LiftMaster, FAAC, and BFT. These operators were installed in large numbers during the area’s building boom, and we stock or can quickly source the parts that keep them running. If your LiftMaster swing arm is groaning in Bent Tree or a FAAC board is dead on a Preston Road estate, we’ll diagnose it and price the repair before any work starts. We don’t push a full replacement when a board repair or re-weld will do.
Common Gate Parts & Welding Problems We See in Far North Dallas Homes
- Hinge post weld fatigue from clay-swelling cycles. In Bent Tree and Prestonwood, decades of wet-dry gumbo soil movement have shifted pilaster footings fractionally each year. That constant micro-movement fatigues the weld where the hinge plate meets the post until it cracks under load.
- Rack-and-pinion teeth stripping on slide gate operators. When clay movement shifts a slide gate’s track even half an inch, the rack teeth and pinion gear bind. The operator keeps pulling, and the teeth strip. We’ve seen this on older slide gates throughout the Preston Road corridor.
- Corroded ornamental iron rails at the lower hinge zone. The lower rail sits closest to the ground, and Far North Dallas’s gumbo clay holds moisture against it. Add 100°F summers, and the wet-dry cycle accelerates rust exactly where the gate carries the most weight.
- HOA entry gates with mag-lock systems that pass electrical testing but fail mechanically. The board will call us because the mag-lock releases but the gate won’t close. Almost always, the hinge post has shifted enough to bind the panel mid-arc. It’s a mechanical problem, not an electronics one, and it needs a welder, not a new board.
Pricing for Gate Parts & Welding in Far North Dallas, TX
We quote every job before work starts, in writing, and that quote doesn’t change at the door. In Far North Dallas, hinge replacement typically runs $180 to $420 per hinge, rail repair $250 to $650 per section, post replacement and resetting $600 to $1,400 per post, and custom fabrication $500 to $2,000 per gate section. What moves the number within those ranges: gate weight, access, whether the pilaster itself needs masonry work, and whether HOA approval adds steps. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Call (936) 296-2568 and we’ll give you a real number.
We Also Serve Cities Near Far North Dallas
We work throughout Far North Dallas and in the communities around it: University Park, Dallas, Plano, and Irving. If you’re in one of those areas and dealing with an aging gate, call us and we’ll tell you straight what’s involved and what it costs. Same live person answers, same written pricing, same 90-Day Done Right Promise.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Far North Dallas
Yes, in most HOA-governed Far North Dallas communities including Bent Tree and Prestonwood, any structural change to a gate, post, or entry monument requires architectural committee approval before work begins. We’re familiar with these applications and can provide drawings, material specs, and finish details that committees ask for. Call (936) 296-2568 and we’ll walk you through what your specific HOA needs.
Far North Dallas sits on Blackland Prairie’s deep expansive clay, and the drought baked it hard, then heavy rains rewetted it. The clay swelled unevenly, lifting one side of a post footing fractions of an inch. That’s enough to bind a swing gate mid-arc, even when the operator and electronics test perfectly. We fix it by resetting the post and re-welding the gate to true alignment, and we see this exact failure across Bent Tree and Prestonwood. Call (936) 296-2568 for a free assessment.
In most Far North Dallas cases, yes. A gate sags in the hinge post, not in the middle. We cut out the fatigued weld or cracked frame section, weld in reinforcing steel matched to the original profile, and re-hang the gate. Replacing the whole panel is a last resort, not a first recommendation. A typical sag repair runs $350 to $900. Call (936) 296-2568 and Hal will tell you what your gate actually needs.
Yes, increasingly. HOAs across Far North Dallas are applying current UL 325 safety standards to any repaired or modified automated gate, which means working safety photocells, proper force limits, and audible warning or entrapment protection where required. We test and document all of this after every repair, and in Prestonwood we recently signed off on a project only after passing a UL 325 safety photocell test. If your HOA is asking for this, call (936) 296-2568 and we’ll handle the compliance side.
For a standard ornamental iron section that matches the original scrollwork and rail profile, we can usually fabricate and weld it within 5 to 10 business days, depending on detail and finish. Larger estate gates with matched picket spacing and custom top-rail work run 2 to 4 weeks. The price is agreed before the first weld, and includes the 90-Day Done Right Promise. Call (936) 296-2568 to get a written quote started.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Far North Dallas since 2001.