Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Far North Dallas
A new driveway gate in Far North Dallas typically runs $4,800 to $18,000 installed, depending on whether you need a single swing gate, a double swing gate, or a sliding gate, and whether we’re matching custom ornamental ironwork. Most installations take two to four days once materials are on site. We’re the local crew that has been repairing and installing gates in Far North Dallas long enough to know exactly what the clay soil under Bent Tree and Prestonwood does to a gate post over 30 years. Call (936) 296-2568 and Hal will talk you through what your property actually needs.
Why Gatewood Fence & Gate Is Far North Dallas’s Preferred Gate Installation Company
Far North Dallas isn’t like the newer suburbs to the north. The gates out here were installed during the 1980s and 1990s building boom, and a lot of them are tired. We get called to Bent Tree, Prestonwood, and the estate corridors along Preston Road and the Dallas North Tollway constantly because the ornamental iron is still beautiful but the operators underneath are obsolete and the posts have shifted. Homeowners don’t want a national outfit that ships in a generic aluminum gate and calls it done. They want someone who will weld on site, match the existing ironwork, and stand behind the work.
Hal Gatewood has been doing exactly that since 2001. The name is on the shop, and the shop is down the road. That is the oldest accountability there is. Every installation we do in Far North Dallas carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround.
Calls are answered by a live person, 24 hours a day. Not a voicemail, not a call center three states away. When you call about a gate installation in Far North Dallas, you get a person who knows the difference between a pilaster anchor failure on a Prestonwood estate and a simple hinge pin replacement in Bent Tree.
Our Gate Installation Services in Far North Dallas
Driveway Gate Installation
Most Far North Dallas driveways were built for vehicles, not foot traffic. A single or double driveway gate needs operators that can handle the weight of ornamental iron, which is considerably heavier than the aluminum gates you see in newer subdivisions. We install driveway gates sized to the existing pilaster columns or new columns we pour ourselves, with operator arms aligned to the gate’s actual arc. On deep lots along Preston Road, we often recommend battery backup so the gate still opens when a summer storm knocks out power, which happens more often than people like to admit.
Pedestrian Gate Installation
A pedestrian gate next to the driveway is a feature on many older Far North Dallas estates, and it needs to match the driveway gate or the whole entry looks wrong. We install pedestrian gates with matching ornamental ironwork, self-closing hinges, and access control that pairs with the main gate system. For HOAs that require mag-lock entry monuments, we handle the licensed low-voltage work that smaller operators won’t touch.
Sliding Gate Installation
Sliding gates make sense where the driveway slope or the setback won’t allow a swing gate to operate cleanly. In Far North Dallas, that often means long driveway runs on properties where the gate needs to clear landscaping or a retaining wall. We install sliding gates with track or cantilever systems, and we size the operator to the gate’s full travel weight. A sliding gate on a Bent Tree property is different from one in a flat newer development because the clay movement affects the track bed, so we set the track on a reinforced base that resists heave.
Swing Gate Installation
Swing gates are the default in Far North Dallas because the driveway entries were built for them. Custom single-panel and double-panel ornamental iron swing gates mounted on brick or stone pilaster columns are the standard out here, and they create specific problems. The hinge pins wear unevenly. The pilaster anchors loosen as the brick moves. The operator arm goes out of alignment. We install swing gates with hinge points that distribute weight correctly and operators that don’t fight the gate. On double swing gates, we set the open and close timing so the panels never slam into each other.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Far North Dallas
We’re certified to service nine major gate brands, and in Far North Dallas we work with LiftMaster, FAAC, and BFT most often. These are the brands homeowners already have on their aging systems, and these are the brands we stock parts for locally. That means when we install a new gate on a Prestonwood estate, we’re not waiting two weeks for a control board to ship from somewhere else. We’re also not going to tell you to rip out a perfectly good FAAC operator just because a national company only installs one brand. If the board is good, we work with it. If it’s obsolete, we tell you straight and give you a price before any work starts.
Common Gate Installation Problems We See in Far North Dallas Homes
- Black gumbo clay heave. Far North Dallas sits on the Blackland Prairie’s deep expansive clay. Between wet winters and 100°F drought summers, the soil swells and shrinks enough to move gate post footings several inches. That throws automated gates out of alignment even when the operator and electronics test perfectly good.
- Aging 1980s and 1990s swing-gate operators. Most of the automated driveway gates in Bent Tree, Prestonwood, and along Preston Road were installed 30 to 40 years ago. The operators are failing at the same time across the whole area, which is why we get so many calls from homeowners who thought they were the only ones dealing with a dead gate.
- Corroded ornamental iron hinge pins and pilaster anchors. The custom single-panel gates installed during the original build draw on ironwork that looks beautiful but has been rusting at the hinge points for decades. We’ve seen gates that literally pulled the upper hinge post out of plumb because the brick pilaster had shifted and the anchor had failed.
- Obsolete access-control boards. Many Far North Dallas HOAs run entry monuments with mag-lock systems that use boards no one manufactures anymore. When those fail, the whole gate shuts down. We replace them with current boards and wire them to match the existing intercom and camera setup.
Pricing for Gate Installation in Far North Dallas, TX
Here are honest numbers for the Far North Dallas market. A single swing driveway gate with a new operator runs $4,800 to $9,500 installed. A double swing gate runs $9,000 to $18,000 depending on ironwork complexity and operator type. A sliding gate runs $7,500 to $16,000. Pedestrian gates run $1,800 to $5,500. Underground operators, which we recommend for double swing gates on high-end estates where you don’t want an above-ground arm, add $2,500 to $4,500 per gate. The price you’re quoted is the price you pay, agreed before any work starts. Call (936) 296-2568 for a free written estimate.
We Also Serve Cities Near Far North Dallas
Our Gate Installation team covers Far North Dallas and the surrounding communities. If you’re in University Park, Dallas, Plano, or Irving, we’ll come out the same way we come to Far North Dallas: with a live person answering the phone and a crew that knows the gates in your neighborhood. You’ll find more detail on our Gate Installation in Far North Dallas page, but the short version is this: we fix what others replace, and we do it on site.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Far North Dallas
They bind because the clay soil under Far North Dallas expands and contracts dramatically with moisture changes. After the extreme drought-rebound cycle of 2022-2023, clay heave in neighborhoods like Bent Tree pushed brick pilaster foundations enough to bind swing gates mid-arc. The gate tests electrically perfect, but physically it cannot complete a close cycle. That requires resetting or replacing the post footings, which we do with helical piers to resist future movement. Call (936) 296-2568 and we’ll diagnose it properly.
You should know that the brick pilaster columns on homes built between 1978 and 1998 were never designed to carry the weight of a heavy ornamental iron gate for 40 years. The anchors work loose, the hinge pins wear, and the masonry itself can crack. Before we install a new gate on an older brick home, we inspect the pilaster condition and often recommend masonry repair or new footings first. Fix the panel without the post and you’ll fix it twice.
Yes. We weld on site, which means we can match the existing ironwork’s pattern, scrollwork, and finish rather than bolting on something that looks close enough. For Prestonwood estates with original 1980s ornamental iron, we fabricate and match the design, then finish it to match the existing patina as closely as the metal allows. If you want it to look original, we can do that.
For a double swing gate on a high-end property, yes. Underground operators are hidden, quieter, and handle heavier gates than most above-ground arms. They cost more up front, but on a Far North Dallas gate that runs multiple times a day, the longevity and the clean look justify it. We install underground LiftMaster and BFT units regularly on Preston Road and Bent Tree estates. The quote includes everything, agreed before we start.
Start by checking your HOA’s design guidelines, because many Far North Dallas HOAs have specific requirements for gate style, color, and access-control systems, especially if the gate is part of a shared entry monument. We install safety edges, photocells, and auto-reverse systems that meet current safety standards, and we handle the low-voltage wiring for mag-lock and intercom setups. Bring us the HOA document and we’ll make sure the installation complies. Call (936) 296-2568 and we’ll walk you through it.
If your Far North Dallas gate is sagging, binding, or just needs to be replaced, call Gatewood Fence & Gate at (936) 296-2568. Hal Gatewood has been at this since 2001, and the name is on the shop. We’ll quote you a price, put it in writing, and stand behind it with the 90-Day Done Right Promise. Free estimates, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, gate repair and installation specialist since 2001.