Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irving
Gate installation in Irving costs $1,800-$6,400 for a residential driveway gate and $4,500-$12,000+ for a commercial slide gate, with HOA approvals in Valley Ranch and Las Colinas typically adding 2-6 weeks to the timeline. We install driveway gates, pedestrian gates, sliding gates, swing gates, and double gates across Irving, and we’ve been doing it since 2001. If you live in Valley Ranch, Las Colinas, or one of the original Irving neighborhoods off Belt Line Road, call Hal Gatewood at (936) 296-2568 and you’ll get a real person, not a recording.
Here’s the truth about gate work in Irving: the HOA usually matters as much as the gate itself. We’ve walked enough Valley Ranch properties to know which communities require architectural review before the first post hole gets dug, which finishes they’ll approve, and how to sequence a shared entry gate install so the management company’s access software doesn’t fight the new hardware. That’s the local knowledge that keeps your project moving.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and the shop has a published address anyone can drive to and knock on the door. That matters in Irving, where a lot of gate work gets handed to crews from three counties away who won’t remember your street name next month. We’ve been locally owned and owner-operated since 2001, and every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no fine print.
Irving has more HOA-controlled entry gates than most North Texas cities, and that changes how installation needs to be handled. We coordinate with property managers in Valley Ranch and the commercial facilities folks in Las Colinas regularly. We know what a management company needs for resident keypad integration, visitor call boxes, and fire lane access compliance. The person who shows up at your Irving property is background-checked and uniformed, and they’ve likely worked a gate down your street before.
Our Gate Installation Services in Irving
Driveway Gate Installation in Irving
Most Irving driveway gates land in the $2,400-$5,800 range for a single swing gate with a basic operator, and $3,500-$7,500 for a double gate. In older Irving neighborhoods near MacArthur Boulevard where lots are wider and setbacks vary, we measure carefully before quoting, because a gate that clears a 1950s driveway curb may not clear a 1990s Valley Ranch approach. Your price is quoted and agreed before any work starts.
Pedestrian Gate Installation in Irving
Pedestrian gates in Irving run $800-$2,200 installed, depending on whether you’re adding a keypad, a mag-lock, or tying into an existing entry system. This comes up constantly in Las Colinas townhome and condo communities, where the pedestrian gate is often the primary entry point and has to work with the property’s access-control software from day one. We handle the coordination before we pour the footing.
Sliding Gate Installation in Irving
Sliding gates are the workhorse of Irving’s commercial side, especially in Las Colinas where campus entrances cycle hundreds of times a day. Residential slide gates in Irving typically run $2,800-$6,500, and commercial installations start around $4,500 and go up from there based on operator duty cycle, safety edges, and loop detector requirements. The black clay soil here means we pay extra attention to the track bedding and the post footer, because a slide gate only slides well when the track stays true.
Swing Gate Installation in Irving
Swing gates are the most common residential style in Valley Ranch and the older neighborhoods around Irving Boulevard, with installed prices from $2,200-$5,500 for a single gate. Double swing gates run $3,800-$7,800. The critical piece in Irving is the hinge post, because expansive clay soil shifts posts out of plumb within a season if the footer isn’t spec’d correctly. We set posts deeper here than crews do in sandier soil counties, and it makes a difference.
Trusted Brands We Service in Irving
We’re certified on nine major gate brands, including FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. For Irving customers, that means we’re not married to one manufacturer when we spec an operator. If a Valley Ranch HOA wants a quiet Viking swing operator and a Las Colinas office park needs a high-cycle FAAC slide unit, we can install both and service them down the road. We also carry common parts and safety components, which means shorter turnaround when something needs replacing. Call (936) 296-2568 and Hal will tell you straight what fits your gate and your budget.
Common Gate Installation Problems We See in Irving Homes
- HOA architectural rejection: In Valley Ranch especially, a gate style, height, or finish that doesn’t match the community’s design standards can stop an installation before it starts. We review the specs against the HOA’s written guidelines before you spend money on materials.
- Black clay soil shifting new posts: Irving sits on the Blackland Prairie, and that expansive clay swells after spring rain and shrinks in summer drought. A newly set post can move out of plumb within one season if the footer wasn’t designed for that movement.
- Shared entry system conflicts: When a new gate and a new keypad don’t talk to the management company’s existing access-control software, residents end up locked out and property managers end up frustrated. We coordinate the integration before installation, not after.
- Operator strain from misaligned tracks: A gate that sags in the hinge or ride track makes the operator work harder, which burns out circuit boards and gears faster than the manufacturer’s cycle rating predicts. Fixing the post alignment first is cheaper than replacing an operator twice.
Pricing for Gate Installation in Irving, TX
Here are straight numbers for the Irving market. A basic single swing gate installation runs $2,200-$4,500. A double swing gate with an operator runs $3,800-$7,800. A residential slide gate runs $2,800-$6,500. A pedestrian gate with a keypad runs $800-$2,200. Commercial slide gates in Las Colinas start around $4,500 and go up based on operator class, safety photocells, and loop detectors. Every quote is written, itemized, and agreed before any work begins. You won’t get a surprise number when the job is done.
Standing offers that don’t require haggling: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (936) 296-2568 for a free estimate.
We Also Serve Cities Near Irving
Our crews serve Irving and the surrounding metro daily. If you’re in Dallas, Duncanville, Addison, or Richardson and need gate work, the same team handles those calls. Learn more about how we approach Gate Installation in Irving and the surrounding area, or call (936) 296-2568 and ask for Hal.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irving
Yes, most Valley Ranch communities require architectural review and written approval before any gate installation begins. The review typically covers gate style, height, finish, and whether the operator or keypad is visible from the street. We’ll help you pull together the spec sheet and drawings the committee wants to see, and we won’t order materials until the approval is in writing. Call (936) 296-2568 and we’ll walk you through it.
The expansive clay under Irving swells when wet and shrinks in drought, which can shift a hinge post out of plumb within one season if the footer isn’t deep or wide enough. We set Irving posts with that movement in mind, using footings sized for the soil, not the gate. It’s a local failure mode we see on gates other companies installed, and it’s why we start with the post, not the panel.
Yes, we regularly install shared entry gates in Irving that integrate with a management company’s existing access-control software, including controller systems from LiftMaster, DoorKing, and others. We coordinate with the property manager before installation so resident keypads, visitor call boxes, and fire lane overrides work on day one. The key is sequencing: gate hardware first, then access software, then testing both together.
In Valley Ranch and across Irving, the seasonal cycle does it. Spring rains swell the black clay and push posts or rack out of alignment, then summer drought shrinks the soil and pulls them the other direction. Your gate can ride off-track twice in one year without a single mechanical failure. Reset the post footing properly once, and you stop paying for the same re-alignment call twice a year.
For a Las Colinas slide gate cycling several hundred times a day, you need a commercial-duty operator rated for continuous or heavy-cycle use, typically a Class III or Class IV unit with external safety photocells and loop detectors. Residential operators won’t hold up. We spec FAAC, BFT, Linear, and Viking commercial units depending on the gate weight and cycle count. Call (936) 296-2568 for an exact recommendation. Estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving since 2001.