Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Murphy
When a gate post leans after a Murphy downpour, or a weld cracks on an ornamental-iron driveway gate, you need someone who knows exactly why it failed. Not a generic repair crew guessing at it. Gatewood Fence & Gate has been cutting, fitting, and welding gate steel on site since 2001, and the Blackland Prairie clay under Murphy keeps our post-reset and hinge-replacement work honest. We answer the phone around the clock at (936) 296-2568 with a live person, not a voicemail tree. Hal Gatewood’s name is on the shop, and he will tell you the same thing at the door that he told you on the phone.
Every Gate Parts & Welding job in Murphy carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no “up to,” no fine print. We quoted you a price before we touched the first bolt, and that is the price you pay.
Why Gatewood Fence & Gate Is Murphy’s Preferred Gate Parts & Welding Company
Murphy homeowners tend to be organized about maintenance until the gate starts binding, and then they want it handled before the HOA inspector drives by. We get that rhythm. Our place in the metro means a technician can be at a home near Maxwell Creek or off South Murphy Road without a long wait, and every person on our crew is background-checked and uniformed. The person who shows up is the same person whose name and license number you can look up at our published shop address. Hal has been at this since 2001, and he is not passing through.
We stay busy in Murphy because we repair what other companies want to replace. A sagging gate does not mean a new gate. It usually means a hinge post that heaved in the clay, a roller that seized, or a top rail that cracked at a weld. We fix the part that failed, not the parts that are fine. The work happens in your driveway, on site, with a welder running off our truck. You can watch it happen. And our standing offer of $40 off any repair over $200 applies in Murphy, plus a permanent 10% discount for seniors and veterans.
Murphy’s gates are also governed by associations. We know to pull the relevant CC&Rs before quoting a replacement, and we have done it in communities across the city. That is a compliance detail a lot of fence companies skip, and it is exactly the detail that matters here.
Our Gate Parts & Welding Services in Murphy
We work on residential driveway gates, backyard gates, and the smaller pedestrian gates that flank them. Most Murphy homes were built between 2000 and 2015, so the original gate hardware is aging out on the same schedule. Here is what we handle most often in Murphy:
Hinge Replacement
When a swing gate scrapes the concrete at the free corner, the problem is usually up at the hinge post, not in the middle of the leaf. Murphy’s clay soil swells hard after wet winters and shrinks in summer, and that flex is transmitted straight into the hinge hardware. We cut off the old hinges, grind the post clean, and weld or bolt on new ones rated for the gate’s actual weight. Then we reset the geometry so the gate hangs square and swings without dragging.
Post Replacement
This is the repair we do most often after a Murphy squall line comes through. A solid wood or metal infill gate catches wind like a sail, and if the original footing was undersized, the post leans and the latch no longer lines up. We dig out the old base, pour a deeper footing suited to Blackland Prairie clay movement, and set a new post in plumb. The gate gets re-hung, the latch adjusted, and the job is done before the next storm finds the same weakness.
Rail Repair
Welded steel frames crack at the joints. Wood rails split at the fasteners. Both failures are common across Murphy’s 2000s-era gates. We weld cracked steel on site, grind the bead smooth, and prime and paint to match. For wood, we replace rotted or split rails with the same dimension lumber and jacket the post correctly. Show me the gate closing on its own and I’ll show you where it’s failing, and it’s almost always a rail pulling away from its post.
Custom Welding
Not every Murphy gate can be fixed with a stock part. Some need a top rail spliced, a decorative scroll reattached after hail dented the profile, or a reinforcing gusset added because the original frame was underbuilt for the wind load. We weld aluminum, steel, and wrought-iron on site. The truck carries a generator welder, shielded gas, and the right rod for the metal in question. If your HOA requires an exact match on a 2008 ornamental gate, we can fabricate the piece instead of sending you to a catalog that stopped printing it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
Gatewood Fence & Gate is certified to service nine gate opener and motor brands, and around Murphy we see a lot of Linear and Ghost Controls operators on builder-grade installs, plus DoorKing on the larger ornamental gates. We keep a stocked service van with common boards, arms, and hardware for those brands, so a board swap or limit-switch repair does not mean a two-week wait for a part. If we do not have it on the truck, we can usually have it in hand within a day or two and complete the repair promptly. A broken opener is not an invitation to leave the gate propped open on Rustic Ridge Drive.
Common Gate Parts & Welding Problems We See in Murphy Homes
- Heaved hinge posts after wet weather. Murphy sits on expansive clay, and a soaked season lifts shallow footings right out of plumb. The gate binds at the latch, the hinges groan, and the operator strains. Resetting the post on a deeper base fixes the root cause.
- Wind-loaded solid gates bending frames and posts. Squall lines push hard against a solid wood or metal infill panel. The leverage snaps rails, cracks welds, and tilts posts that were poured short during the building boom. Reinforcement is often the better fix than replacement.
- Hail-fractured welds and peeled coating on ornamental steel. Collin County gets real hail, and a good storm can fracture a weld at a stress point and expose bare steel under chipped powder coat. That steel rusts before the next season.
- Gate operator failures right after a power cut. Storm-related outages trip control boards and knock limit settings out of alignment. A board that won’t reset after the power returns is a common Murphy service call, and it’s usually repairable rather than a full operator swap.
One Maxwell Creek call sticks with us. Our techs pulled the CC&Rs before touching a sagging ornamental-iron swing gate. The original hinge post had heaved out of plumb in the Blackland Prairie clay after a wet winter, and the powder coat was peeling from hail damage. We reset the post on a deeper footing, welded a cracked top rail, and matched the HOA-approved color before re-hanging the gate. The homeowner never got a violation notice, and the gate has not sagged since. That is what a spec-matched repair in Murphy looks like.
Pricing for Gate Parts & Welding in Murphy, TX
In Murphy, hinge replacement on a standard wood or metal swing gate typically runs $180 to $340, depending on the number of hinges and the condition of the post. Post replacement runs $350 to $650 per post, including digging out the old footing, pouring a deeper base, and re-hanging the gate. Rail repair or a mid-frame weld runs $150 to $400, while custom fabrication of a decorative or structural piece starts around $200 and goes up with complexity. A full gate re-hang with hinge and latch alignment is typically $250 to $450. These are our quoted ranges for Murphy’s market. We give you the exact number before any work starts, and the price does not change at the door. No trip charge inside the county, and the $40-off-any-repair-over-$200 offer applies. Call (936) 296-2568 for a free estimate.
We Also Serve Cities Near Murphy
Gatewood Fence & Gate is the Gate Parts & Welding crew that serves Gate Parts & Welding in Murphy and the surrounding communities. That includes University Park, Dallas, Plano, and Irving. Same pricing, same 90-Day Done Right Promise, same live person on the phone. We schedule work in Murphy daily, and we coordinate from our DFW office.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Murphy
The problem is almost always the footing depth and the clay underneath it. Murphy’s Blackland Prairie soil swells when wet and shrinks when dry, and that movement exerts lateral pressure on a shallow post base. If the original footing only went 24 inches, the post will walk out of plumb again every wet cycle. A proper reset requires digging down past the active clay layer, widening the base, and sometimes adding a concrete collar. If your post was reset once and moved again, the original depth was probably not corrected. Call (936) 296-2568 and we will pull it, measure the old hole, and set it deeper.
Yes, and we start by reading the CC&Rs. Murphy HOAs commonly specify approved wood species, stain colors, and picket spacing, and an out-of-spec repair can trigger a violation notice that costs you a redo. When we quote a wood gate repair, we check the governing documents first and match the existing materials and finish to the neighborhood standard. Communities like Maxwell Creek and Christi Park have their own lists, and we have worked from them before. If a repair can be done with the existing panel, we do that first. A full replacement only happens when the wood cannot hold a structurally sound repair.
Almost never. A sagging swing gate in Murphy is usually a hinge post that has heaved out of plumb, or a top hinge that has worn egg-shaped and let the leaf drop. We cut off the old hinges, inspect the post, reset it if needed, and weld or bolt on new hinges rated for the gate’s weight. The gate gets squared and test-swept before we crank the operator back up. Most sagging gates in Murphy are fixed same-day without replacing the panel. The exception is when a wood frame has honestly rotted through at the hinge line, and even then we price the repair before we discuss replacement.
Nearly every operator installed in Murphy has a manual release. On swing gates, it is usually a keyed release on the operator housing or an arm lever you turn to disengage the drive. On slide gates, there is typically a pull-chain or release handle on the operator. Pull the release, then move the gate by hand slowly, keeping your hands well away from the drive chain and the idler wheels. Disconnect the operator from power at the breaker before you do this. If the gate is stuck or the release will not disengage, do not force it. Call us at (936) 296-2568 and we will walk you through it or send someone out. The release procedure is slightly different for Linear, Ghost Controls, and DoorKing units, and we can talk you through your specific model.
You need them. Photo-eyes are the sensor pair that stops and reverses the gate when a person, dog, or car is in the swing path. Without them, a closing gate becomes a crush hazard, and that is a liability a homeowner in an HOA neighborhood cannot afford. Murphy is full of young families and delivery traffic. The UL 325 standard that governs automatic gate operators requires a monitored entrapment protection device, and skipping the photo-eyes means the operator is not compliant. We install and align photo-eyes on every automatic gate job, and we test them before we leave. The cost is a fraction of what a single injury claim would be.
Call Gatewood Fence & Gate for Gate Parts & Welding in Murphy
If your gate is binding, leaning, or sagging in Murphy, call (936) 296-2568. A live person answers around the clock, not a call center three states away. We will give you an honest quote before any work starts, and the 90-Day Done Right Promise comes with it in writing. Hal Gatewood has been at this since 2001, and his name is on the shop, on the invoice, and on every job we finish in Murphy. Free estimates, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call before the next storm finds the weak spot.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.