Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in University Park, TX
When your gate starts dragging on the driveway or won’t latch correctly, the problem usually isn’t the gate panel itself-it’s the hinge or the post supporting that weight. Fixing a hinge and post in University Park typically costs between $250 and $600 depending on whether we need weld & rust repair, reinforce the post, or perform a full structural reset. We handle these repairs on-site, usually within a single visit, so you don’t have to worry about an insecure property.
I’ve been doing this since 2001, and I can tell you that most gate issues in neighborhoods like University Park start with the foundation. If the post is leaning or the hinge has torn away from the metal, the gate is going to drag. We don’t believe in quick fixes that just patch the problem for a month. When we come out to provide Gate Repair in University Park, we look at the root cause. If your post is sinking into the soil or the hinge assembly is fatigued, we fix the structural failure so you aren’t calling us back next season. We offer a 90-Day Done Right Promise on every job, and because I’m the owner, that’s a commitment I stand behind personally.
If you need help, call us at (936) 296-2568. We answer our own phones, day or night. We don’t use call centers, and we certainly don’t pass you off to a dispatcher.
When You Need Hinge & Post Repair
You’ll often notice a hinge or post issue long before the gate stops working entirely. Catching these early saves you money and prevents damage to your automatic gate, whether you have a Linear, Viking, or Ghost Controls system.
- The Dragging Gate: If your gate leaves a crescent-shaped scratch on your driveway, the hinge is likely failing or the post has shifted. This puts immense strain on your motor, which can lead to expensive opener repairs later.
- The “Clunk” Sound: If you hear a metallic thud or a grinding noise when the gate moves, check the hinge plate. Often, the weld has cracked or the bolts have loosened, allowing the gate to shift out of alignment.
- Leaning Posts: In the clay-heavy soil we see around University Park, posts can shift after heavy rains or prolonged dry spells. If your post looks like it’s tilting toward the street, the gate will never latch or close properly.
- Failed Latches: Often, people think their latch mechanism is broken when the real culprit is a sagging gate. If the gate doesn’t line up with the catch, the latch can’t engage, leaving your property vulnerable.
- Visible Rust or Cracks: If you see cracks in the weld bead where the hinge meets the post, don’t wait for it to snap. Metal fatigue only gets worse with the weight of the gate.
If you see any of these signs, don’t try to force the gate closed. High-tension gate components can be dangerous, and trying to muscle a heavy gate into place can cause serious injury or damage the equipment. Give us a call at (936) 296-2568 to have us take a look.
Our Hinge & Post Repair Process
We don’t believe in hauling your gate off to a shop unless it is absolutely necessary. We bring the shop to you. Our truck is equipped for on-site gate repair and fabrication, which keeps costs down and gets your gate back in service faster.
- Structural Assessment: I or one of my crew will inspect the post and the hinges. We check the plumb of the post and look for fatigue in the metal. We want to know exactly why it failed-whether it’s soil movement, metal fatigue, or a previous bad repair.
- Surface Preparation: Before we weld, we clean the area. A weld is only as good as the steel underneath it. We grind away old, failing welds, rust, and paint to get down to clean, bare metal.
- On-Site Welding or Reinforcement: We weld the hinge directly to the post or reinforce the mounting plate. If the post itself is the problem, we may install additional bracing or concrete reinforcement to stabilize it.
- Alignment and Adjustment: Once the hinge is secure, we adjust the gate to ensure it swings freely and latches properly. We test the operation against the motor’s limits to make sure it doesn’t over-travel.
- Final Verification: We put the gate through a full cycle of operation. We check the latch engagement, the smoothness of the swing, and the load on the motor. We don’t leave until it works exactly the way it should.
Every single repair comes with our 90-Day Done Right Promise. If it isn’t right, we make it right. It’s that simple. We are locally owned and have been serving the area since 2001, so you know where to find us.
Hinge & Post Repair Pricing in University Park
We believe in upfront pricing. You shouldn’t have to guess what a repair will cost, and you shouldn’t be surprised by a bill at the door. While every gate is different, we can provide a general range for our services in the University Park area.
| Service Type | Estimated Price Range |
|---|---|
| Hinge Re-Welding & Reinforcement | $250 – $450 |
| Post Stabilization/Re-setting | $350 – $600 |
| Full Hinge Assembly Replacement | $300 – $550 |
We offer a standing $40 discount on any repair over $200. Plus, if you are a senior or a veteran, we provide a permanent 10% discount on our work. We also offer a free second opinion on any written estimate you’ve received from another company. If you aren’t sure if you need a repair or a replacement, call us at (936) 296-2568. We will give you an honest answer, and estimates are always free.
FAQs - Hinge & Post Repair
How do I know if my hinge is broken or if the post is sinking?
If the gate is dragging but the post looks perfectly vertical, the issue is likely the hinge or the weld connecting it to the gate frame. If the post itself is leaning toward the driveway or away from the fence line, the foundation has shifted, and the post needs to be stabilized or reset. Call us at (936) 296-2568, and we can determine the exact cause during a quick inspection.
Can you fix a gate that has been welded poorly by a previous company?
Yes, we do this all the time. A poor weld often fails because the surface wasn’t cleaned properly or the wrong rod was used for the metal type. We grind away the old, sloppy work, prep the surface down to clean steel, and perform a proper, structural lock repair and weld that will hold up to the weight of your gate.
Is it cheaper to repair the hinge or replace the whole gate?
In almost every case, repairing the hinge and post is significantly cheaper than replacing the gate. We are a repair-first company, meaning we don’t try to sell you a new gate when a simple fix will do the job. If your gate frame is solid, we can fix the hinge or post and get you back in business for a fraction of the cost of a new install.
Do you charge a trip fee to come out to University Park?
We do not charge a trip fee for service calls within the county. We are locally owned and operate right here in the area, so we don’t have to charge for travel time. Give us a call to schedule your free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving University Park.