Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Farmers Branch
Gate repair in Farmers Branch usually costs between $175 and $600 depending on what’s actually wrong, and most hinge, post, and opener fixes can be handled in a single visit. We’ve been out here long enough to know the difference between a gate that needs a fifteen-minute adjustment and one that needs the post dug out and re-set in concrete. If your gate won’t open, sags on one corner, or makes a sound like a dying power tool, call (936) 296-2568 and you’ll get Hal or a member of his crew on the line, not a recording.
We work all over Farmers Branch, from the ranch-style neighborhoods off Valley View Lane down to the commercial corridors along Interstate 35E and Valwood Parkway. You won’t have to explain to us why your driveway gate drags on the latch side after a wet spring. We already know. The clay under this city heaves like a boat deck in a storm, and that’s usually where the trouble starts.
Why Gatewood Fence & Gate Is Farmers Branch’s Preferred Gate Repair Company
Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That’s a different kind of accountability than you get from a company that subcontracts work to a guy with a magnet on his truck door. Our Gate Repair crew welds on site, in your driveway, so the gate doesn’t leave your property and you can watch what’s being done to it if you want to. We’ve found that people in Farmers Branch appreciate that. You see the repair happen. You see the part that failed. You know what you paid for.
Farmers Branch customers call us for the same reason they keep a local plumber’s number on the fridge. We answer the phone around the clock with a live person, and when we say we’ll be there in a window, we’re there. No voicemail, no call center three states away, no chatbot. Just a person who knows gate openers and gate frames and gate hinges, and who isn’t going anywhere. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and the crew that shows up in Farmers Branch is background-checked, uniformed, and trained to service nine major brands including FAAC, BFT, Linear, and Viking.
The 90-Day Done Right Promise is printed on every job, not buried in fine print. If the repair doesn’t hold, one call brings Hal back. That’s the whole guarantee. It’s simple because it has to be simple. We repair what other companies want to replace, and we stand behind the work long enough for you to test it through rain, heat, and heavy use.
Response Time to Farmers Branch
Most Farmers Branch repair calls are scheduled same-day or next-day. Emergency calls for a gate stuck open or stuck closed, a gate that won’t latch, or an opener that’s smoking can often be reached within a few hours. We keep common parts for LiftMaster, DoorKing, and Elite operators on the trucks, along with hinge stock, post brackets, and welding gear, so a lot of jobs don’t need a second trip for parts. Call (936) 296-2568 and we’ll tell you honestly when we can get to your street.
Our Gate Repair Services in Farmers Branch
Electric Gate Repair
Most electric gate failures in Farmers Branch come down to one of three things: a control board that’s fried from power surges or overheating, a limit switch that’s drifted so the gate doesn’t know where to stop, or a capacitor that’s given up the ghost. We diagnose all three on the spot. If your gate opens fine but won’t close, or closes fine but won’t open, or just sits there humming with no movement, we’ll pull the cover, find the fault, and quote you a number before we touch anything. No surprises on the invoice.
On commercial properties along the Valwood corridor, the boards fail differently than on residential streets. A slide gate running 80 cycles a day through a Texas summer will cook a residential-grade board in months, not years. We’ve replaced enough of them to spot that pattern from the parking lot. That means we stock the right boards for commercial duty cycles, not just whatever the parts house had on sale.
Automatic Gate Repair
Automatic gate repair in Farmers Branch covers swing-arm operators, slide operators, and the less common barrier arm. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we’ll tell you upfront if your operator is worth repairing or if replacement is the smarter money. We’re repair-first by habit. Hal gets annoyed when he sees a $40 gear swapped out for a $900 opener because it was easier for the last guy. That’s not how we work.
Out near Valwood Parkway, we pulled a DoorKing slide gate that had lost all motion after years of 80-cycle days. The property manager assumed the operator was rated for commercial duty. It wasn’t. Our tech found a fried control board and a worn rack and pinion. We upgraded the operator to a high-cycle Elite unit, replaced the rack, and recalibrated the loop detector so the gate no longer drops chips and pallet traffic. That’s what a proper repair looks like when you understand what the gate actually does all day.
Hinge & Post Repair
In Farmers Branch, hinge and post repair is our bread and butter, and the reason is the dirt. The Blackland Prairie clay under this city swells after spring rain and contracts hard in the summer dry season. That annual cycle works gate posts loose and throws frames out of square. A gate sags in the hinge post, not in the middle, and that’s where we start. If the post is still set firm in concrete, we can often weld on new hinge brackets or re-hang the leaf and have it swinging true in an hour or two. If the post is heaving, it needs to come out, the footing re-dug, and the post re-set with fresh concrete.
Fixing the panel without the post and you’ll fix it twice. We don’t do surface patches on failing posts. We’ll dig it out, set it right, and weld the hinges back on so the gate hangs straight and swings without dragging.
Gate Realignment
Gate realignment means bringing a gate back to level and plumb without necessarily replacing anything. A gate that drags on the latch post, won’t close all the way, or has a gap at the top you could throw a cat through is usually a realignment job. In Farmers Branch, it’s often the first sign that the post footing is weakening. Show me the gate closing on its own and I’ll show you where it’s failing. We’ll adjust the hinges, shim or re-set the posts if they’ve moved, and make sure the gate latches cleanly when it closes.
For automatic gates, realignment also means checking the operator’s mount and the travel limits. If the gate rides up on the hinge side, the limit switch has to work harder to close it fully, and that’s extra wear on the motor and gearbox. We fix the geometry first, then tune the operator to match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We’re certified to service nine major gate brands, and we stock common repair parts for FAAC, BFT, Linear, and Viking systems right on the truck. That means fewer second trips and faster turnarounds for Farmers Branch customers. If your opener is a brand we don’t stock parts for, we’ll order it and give you an honest timeline rather than pretending we can have it fixed tomorrow.
On commercial slide gates along I-35E and the Valwood Industrial Park, we see LiftMaster and Elite operators that have been through years of hard service. We know what parts those units burn through and which ones are worth rebuilding versus replacing. That knowledge comes from working on them in this city, in this heat, with these duty cycles.
Common Gate Repair Problems We See in Farmers Branch Homes
- Clay heave throws hinge posts out of plumb. The 1950s and 1960s ranch homes along Webb Chapel Road and Valley View Lane were built with original wrought-iron driveway gates that are now 50 to 70 years old. Decades of Blackland clay shrink-swell have worked the post footings loose, and many of those gates now sag badly or drag on the sidewalk. Surface hinge adjustments won’t hold; the post footing has to be re-set.
- Triple-digit summer heat kills rubber seals and drive belts. Farmers Branch summers routinely hit 100+ degrees, which dries out the rubber drive belts on swing and slide operators and causes plastic gears to crack. Manufacturers publish maintenance schedules that don’t account for Texas heat. We see belts that look fine but snap under load in July, and seals that turned to dust by September.
- Commercial slide gates burn through residential-grade control boards. Along the Valwood corridor and I-35E frontage, warehouse and distribution gates cycle 60 to 100+ times daily. Standard residential boards can’t take that. The most common commercial call we get in Farmers Branch is a fried LiftMaster or Elite board on a slide gate that the property manager assumed was rated for commercial duty but wasn’t.
- Rust at the base of old wrought-iron gate posts. The original ornamental iron gates in Farmers Branch’s older neighborhoods are beautiful, but steel and sprinkler spray don’t mix. We regularly see posts rusted paper-thin at ground level, holding up a 200-pound gate by habit and hope. We can weld new steel stock in place and re-anchor the post rather than replacing the whole gate.
Pricing for Gate Repair in Farmers Branch, TX
Here’s what you can expect to pay in Farmers Branch. Hinge and bracket repair usually runs $175 to $350 per gate leaf, depending on how much steel needs welding and whether the post is still solid. Gate realignment typically costs $150 to $300. Electric gate repair, including control board replacement, limit switch adjustment, or capacitor replacement, lands between $200 and $500 depending on the operator and what’s failed. Full post replacement with a re-set footing runs $400 to $800 because it involves digging, concrete, and re-hanging the leaf.
Commercial slide gate repair on Valwood corridor properties often runs higher, $500 to $1,200, because the operators are bigger, the boards are pricier, and the wiring is more involved. Every quote includes the price up front, agreed before work starts, and the 90-Day Done Right Promise in writing. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve gotten from another company. Call (936) 296-2568 for an exact quote, estimates are free.
We Also Serve Cities Near Farmers Branch
Gate Repair in Farmers Branch is our home turf, but we also run crews to University Park, Dallas, Plano, and Irving. If you’re just outside the Farmers Branch line, call (936) 296-2568 and we’ll tell you whether you’re inside our free trip area. It’s a short drive and we make it every week.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Farmers Branch
The hinges are rarely the problem. Your gate is sagging because the hinge post is leaning, and the hinge post is leaning because the Blackland clay under Farmers Branch heaves with every wet-dry cycle. Replacing the hinges on a moving post just transfers the load to the new parts, and they’ll fail the same way. The fix is to dig out the post, re-set the footing, and then re-hang the gate. That runs $400 to $800 for a standard residential post, and it’s the only repair that holds. Call (936) 296-2568 and we’ll come look at the post, tell you honestly if it can be saved, and quote you before any digging starts.
It’s the operator living beyond its rating. Most Valwood corridor gates run 60 to 100+ cycles a day, and a residential-grade board simply can’t shed the heat or take the switching frequency. The board fries, the gate stops, and a few months later the replacement board fries too. The fix is to upgrade to a high-cycle commercial operator like an Elite or a commercial-rated LiftMaster, and to replace the rack and pinion if it’s worn enough to load up the motor. Budget $500 to $1,200 depending on the gate’s length and weight. We’ve done this upgrade on multiple properties along Valwood, and we’ll quote the whole job before we order parts.
You can, and on long driveway runs where running mains power means trenching hundreds of feet, it’s often the practical choice. But Farmers Branch summers are hard on solar systems. The heat desiccates the rubber seals and drive belts faster than the manufacturer’s service schedule anticipates, and the battery bank has to be sized for the triple-digit heat or it’ll fail early. We service solar operators from FAAC and Mighty Mule regularly, and we’ll size the panel and battery for Texas conditions, not the manufacturer’s default chart. Budget $800 to $1,500 for a complete solar opener installed, depending on the gate’s width and weight.
Yes, and it’s an urgent one. A gate that closes on a vehicle means the safety loop detector, the photo eyes, or the reverse sensor have failed. The operator no longer knows a car is in the path. This is exactly the situation that can damage a vehicle or injure someone, and you should stop using the gate until it’s fixed. We’ll test the loop detector, the photo eye alignment, and the reverse sensitivity setting, and we’ll repair or replace what’s failed. Gate safety components are not a place for DIY work with household tools. Call (936) 296-2568 and we’ll get there as fast as we can.
Usually, yes. If the gate leaf itself is still sound, we can cut out the rusted section at the base of the post, weld in new steel stock, and re-anchor the post with a fresh concrete footing. The original ornamental gate stays on your driveway. If the rust has traveled up into the hinge mounts or the gate frame itself, we’ll weld those sections too, on site, rather than hauling the gate away. This kind of repair runs $400 to $800 depending on how much steel needs replacing. The name is on the shop, and the shop is down the road. You can drive to the shop and look Hal in the eye before you write the check.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Farmers Branch and the surrounding metro since 2001.
Call (936) 296-2568 now for a free, upfront price on gate repair in Farmers Branch. A live person answers, day or night.