Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control in Irving runs $285-$1,850 for most residential systems, and the price depends on whether you’re keying into an existing Gate Motor & Opener - Irving or replacing the whole setup. If you live in Valley Ranch, Las Colinas, or one of the older Irving neighborhoods near MacArthur, you already know the soil here doesn’t stay put. We’ve been fixing gate systems in Irving long enough to expect the clay to move before the circuit board gives out. Call (936) 296-2568 and you’ll get Hal or someone from his crew on the phone, not a recording.
This isn’t a side trade for us. We’re Gate Access Control specialists who carry parts for the operators Irving actually uses, from LiftMaster slide units on Valley Ranch HOA gates to FAAC swing operators on Las Colinas townhouse entries. You need a keypad that works when your hands are full, a remote that doesn’t quit after one season, or a Gate Access Control in Irving call that gets answered by somebody who knows the difference between a Loop 12 office gate and a residential swing gate off Belt Line Road. That’s what we do.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Access Control Company
Hal Gatewood has had his name on the shop since 2001, and he still picks up the phone. When an Irving property manager calls about a slide gate that’s been down since morning, the person who shows up has a published address, a license number you can look up, and 90 days of written backing on the work. No dispatch queue, no call center, no crew that changes every time. The same faces come back.
We spend a lot of time in Irving because the gate problems here have a rhythm. Spring rains swell the Blackland Prairie clay and push posts out of plumb. By July, the drought pulls the soil back and the same gate leans the other direction. We see more gate operators fail from post movement than from electrical faults, and that changes where we start. Instead of swapping a board and hoping, we check the footing first. That kind of local knowledge only comes from working the same streets for years.
Our response window to Irving runs tight. If you’re off MacArthur near the Toyota Music Factory or out in Valley Ranch near the canals, we can usually get a tech to your gate the same day you call for emergency access problems. We carry boards, keypads, photocells, and remotes in the truck, so most Irving jobs don’t wait on a parts order. And every repair over $200 comes with $40 off, no trip charge inside the county.
Our Gate Access Control Services in Irving
Here’s what we handle most often in Irving, including Gate Repair in Irving, and how the local conditions change the job compared to other parts of the Metroplex.
Keypad Entry
A hard-wired keypad on a Valley Ranch HOA gate gets hit hundreds of times a week. Heat above 100°F softens the keypad membrane and shortens its life, especially on south-facing posts with no shade. We install and service keypads rated for the DFW sun, and we set them up so property managers can add or remove codes without a service call. Typical keypad replacement in Irving runs $285-$495 including the labor and programming.
Remote Control
Remotes for Irving gates range from simple fixed-code transmitters on older 1990s systems to rolling-code units paired with modern operators. If you’re in a Las Colinas condo with a shared gate, the remote frequency can conflict with neighbor units or nearby commercial signals. We diagnose whether the transmitter, receiver, or operator logic is at fault, and we program new remotes on site. Most remote repairs in Irving land between $95 and $220.
Phone Entry
Phone-entry systems are common at Las Colinas office campuses and gated apartment communities in Irving, and they take a beating from daily tenant turnover. The call module, directory board, and line wiring all degrade faster with Texas heat and humidity. We service phone-entry panels for both residential and light commercial gates, and we take the time to walk the property manager through the admin settings before we leave. Expect $400-$950 for a full phone-entry module replacement with programming.
Card Reader
Card readers on Irving access gates often pair with an HOA management database or a property manager’s access software. Readers fail from lightning strikes, moisture intrusion, and plain old wear on the card slot. We replace and wire new readers, tune the antenna range, and make sure the gate responds every time the card hits the reader. Card reader swaps typically run $350-$780 in Irving.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We stock parts for the brands Irving actually runs: FAAC swing operators on older Valley Ranch gates, BFT slide units on Las Colinas commercial entries, Linear remotes and receivers on 1980s-era residential systems, and Viking operators on heavier industrial gates. If your HOA board spec’d a DoorKing or LiftMaster, we carry boards, limit switches, and loop detectors for those too. Hal runs certified service on nine major brands, so when we say we can fix it in the driveway, we mean the parts are in the truck, not on order.
Common Gate Access Control Problems We See in Irving Homes
- Posts leaning after spring rain. The clay around your gate post swells, then shrinks, and the post tilts. The gate still opens, but the keypad and photo eyes are now out of alignment. We reset the post before we touch the operator.
- Keypads failing in extreme heat. Irving summers push surface temperatures past 140°F on dark metal posts. Keypad membranes crack and buttons stop registering. This is especially common on west-facing Valley Ranch gates.
- Slide gates grinding off their track during drought. When the soil dries, it pulls away from the footing and the track loses its level. The gate panel drags, the motor strains, and eventually the limit switch trips. We fix the footing first, then the track.
- Photocell misalignment after soil movement. A gate that moves even a quarter-inch off level will knock its entrapment sensors out of alignment. The gate refuses to close, or reverses for no obvious reason. This is one of the most common Irving access-control failures, and it rarely has anything to do with the sensor itself.
Pricing for Gate Access Control in Irving, TX
Here are realistic numbers for Irving’s market. A keypad replacement runs $285-$495. A new remote programmed on site costs $95-$220. Phone entry modules run $400-$950 installed. Card readers land between $350 and $780. If your entire access-control system needs replacement, Irving homeowners typically pay $1,200-$3,800 for a full keypad, receiver, and operator integration, depending on gate span and whether we’re wiring from scratch or replacing existing components. HOA slide gates in Valley Ranch and Las Colinas run higher because the operators are commercial-grade and the labor includes working with property managers on code compliance. Every price gets quoted and agreed to in writing before we start. No surprises at the door. Call (936) 296-2568 for a free estimate.
We Also Serve Cities Near Irving
Our crews run regularly from Irving to Irving‘s neighboring communities, including Dallas, Duncanville, Addison, and Richardson. The soil and heat issues are similar across the northern Blackland Prairie, which means the same post-and-footing repair approach applies whether your gate is off Belt Line or closer to White Rock Creek.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
Because the expansive clay under the track swells when it rains and shrinks when it dries, and each cycle shifts the track out of level. The fix is resetting the track and post footing in fresh concrete, not just forcing the gate back onto the rail. In Valley Ranch we see this twice a year on the same gates. Call us before the next rain cycle and we’ll check the footing while it’s still dry.
Yes, and for gates far from a power source, solar is often the only practical option. We size the panel and battery to the gate’s cycle count, not just its span, because an Irving summer demands more power than a mild climate would. The key is matching the operator to the gate weight and using a battery sized for cloudy weeks in March. We’ll spec it and handle the Irving Gate Installation right the first time.
The simplest test is to close the gate and put a solid object, like a trash can, in its path. The gate should reverse before it exerts enough force to harm a person. If it doesn’t, the photo eyes or the force sensor need immediate attention. We check entrapment protection on every Irving service call because a gate that doesn’t reverse is a liability waiting to happen.
Yes, and we’ve seen it enough to know the pattern. The keypad membrane expands in 100°F heat and the contacts stop registering. South-facing and dark metal posts make it worse. The fix is a weather-rated keypad mounted in shade or inside a sun shield. We carry them on the truck. Call for a replacement and we’ll install it before the next heat wave.
No. A leaning post stresses the hinges, the operator, and the photo eyes at the same time, and the repair bill only grows. We reset the post in fresh concrete while the gate is still operable, which is far cheaper than waiting for a full failure. If your HOA is in Valley Ranch, we’ve likely done this repair on a neighboring street already. Call (936) 296-2568 and we’ll come take a look.
Need gate access control in Irving? Call (936) 296-2568 for a free estimate, and a live person will answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving since 2001.