Lock Repair in University Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Lock Repair in University Park, TX

When your gate lock stops working, your security in University Park is compromised, and you need a fix that lasts rather than a temporary patch. At Gatewood Fence & Gate, we handle gate repair and lock repairs for residential and commercial gates throughout the area, from the older estates near SMU to the newer builds along Preston Road. If your key is sticking, the latch won’t engage, or your electronic access system is failing, we can help. We have been owner-operated since 2001, and I personally stand behind every repair with our 90-Day Done Right Promise. If you are dealing with a faulty gate lock, call us at (936) 296-2568 for an assessment. We offer free second opinions on any written estimate you have already received, and we are happy to provide upfront pricing before we turn a single screw.

A gate lock isn’t just a piece of hardware; it is the first line of defense for your property. Whether you need a simple manual latch adjustment or a complex repair for a digital keypad system, we are here to help. You can learn more about our broader Gate Repair in University Park services if you are facing issues beyond just the locking mechanism. We believe in fixing things right the first time so you do not have to call us back next week.

When You Need Lock Repair

I have seen just about every type of gate failure in University Park over the last 29 years. Sometimes a lock issue is actually a symptom of something else going on with the gate structure. Here are the most common signs that it is time to call us:

• The Latch Misses the Striker: If your gate is sagging even a fraction of an inch, the latch will no longer line up with the receiver. This is a structural issue, not just a lock issue, and we fix the hinge post first to align the gate properly.
• Keyway is Stiff or Jammed: Over time, dust and grime from our local Texas summers can gum up the internal pins of a lock cylinder. If you are forcing your key to turn, you are risking a broken key inside the lock, which makes the repair much more difficult.
• Electronic Keypad Won’t Engage: If you use brands like DoorKing or Linear, a failure often stems from the control board or a frayed wire rather than the lock itself. We troubleshoot the entire circuit to ensure the signal is actually reaching the magnetic lock.
• Gate Won’t Latch Automatically: When the gate swings shut but bounces back open, the latch spring is likely worn out. We replace these components with heavy-duty parts that hold up better against the wind loads we see in North Texas.
• Corrosion on the Magnetic Lock: We frequently see magnetic locks on automatic gates lose their holding power due to moisture buildup or electrical shorts. If your gate feels like it is locked but pushes open with light pressure, your security is at risk and the magnet needs professional testing.

Our Lock Repair Process

We do not believe in swapping out parts just to run up the bill. My process is focused on identifying the root cause so the repair actually holds. Here is how we handle your lock repair:

1. Physical Inspection and Alignment Check: I start by checking the gate’s level and the hinge integrity. If the gate is dragging on the driveway or sitting crooked, the lock will never function correctly. We fix the foundation of the gate before we touch the lock.
2. Component Testing: For electronic systems like Viking or Ghost Controls, we test the voltage at the lock connection. We identify whether the issue is a failed solenoid, a shorted wire, or a bad keypad controller.
3. On-Site Welding or Adjustment: Many gate companies want to take your gate back to their shop. We perform on-site welding and adjustments right in your driveway. If the striker plate needs to be moved or reinforced, we do it while you watch.
4. Lubrication and Weatherproofing: We use specific, non-attracting lubricants that do not collect the dust and grit common in University Park. We also seal any entry points where water might be causing electrical shorts.
5. Final Stress Test: We cycle the gate multiple times to ensure the latch engages firmly and the motor stops exactly where it should. We do not leave until the gate is latching smoothly every single time.

Lock Repair Pricing in University Park

I believe in upfront pricing. You should know what you are paying before we start, and you should never be surprised by a bill. While every gate is different, most simple lock repairs fall into a predictable range. Remember, we offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200.

If you have an existing written estimate from another company, I am happy to provide a free second opinion. We do not have trip charges for customers inside the county, so you do not have to pay just to have me look at the problem. Call (936) 296-2568 to discuss your gate and get an accurate, honest price.

FAQs - Lock Repair

How can I tell if my gate lock is broken or if the gate itself is the problem?

Most of the time, the lock is fine, but the gate has shifted and needs weld & rust repair or adjustment. If your latch is hitting the side of the striker plate or not clicking into place, your gate is likely sagging or the hinges have worn down. We check the alignment first because a new lock will just fail again if the gate isn’t hanging straight. Call us to have a look; we’ll tell you exactly what’s causing the misalignment.

Can you repair electronic locks for brands like DoorKing or Linear?

Yes, we are certified for automatic gate repair on nine major brands including DoorKing, Linear, Viking, and Ghost Controls. We don’t just replace the lock; we test the wiring, the control board, and the power supply to ensure the whole system is communicating correctly. If you have a specific error code on your keypad, let us know when you call (936) 296-2568 so we can bring the right diagnostic tools.

Is it cheaper to repair the lock or replace the entire gate system?

In almost every case, it is significantly cheaper to repair the existing hardware. Many national companies will push you toward a full replacement because it is easier for them, but we specialize in electric gate repair and general repair. Unless the gate is rusted through or the motor is completely burnt out, we can usually make it work like new for a fraction of the cost of a replacement. We are honest about whether a repair is worth your money.

What happens if the lock breaks again shortly after you fix it?

That is exactly why we offer our 90-Day Done Right Promise. If the lock or the adjustment we performed fails within 90 days, you call us, and I will come back out to make it right. It is written on every invoice because I believe in the work we do. We don’t hide behind fine print; we stand behind our reputation in University Park.

Safety Note: Automatic gate systems involve high-tension springs, heavy steel panels, and electrical components. If you are dealing with a jammed gate, do not try to force it open manually, as this can cause the gate to fall or the motor to snap. Let a trained professional handle the mechanics to avoid injury. Contact Gatewood Fence & Gate at (936) 296-2568 for safe, professional assistance.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving University Park.