Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in University Park?
Gate repair in University Park typically costs between $180 and $450 for standard hardware adjustments, hinge welding, or sensor realignment, while motor or control board repairs generally range from $450 to $950 depending on the complexity of the internal components. Most homeowners in our area find that a focused, on-site repair is significantly more cost-effective than a full system replacement. Call (936) 296-2568 for an exact quote - estimates are free and we provide upfront pricing.
I am Hal Gatewood, and for over 29 years, I have seen the same pattern in University Park. A gate starts to sag, the motor grinds, or the sensor stops catching, and a homeowner calls a national service that wants to sell them a brand new, expensive system. That is not how we operate at Gatewood Fence & Gate. My name is on the shop, and I have been doing this since 2001. We believe in fixing the problem in your driveway, not replacing parts that still have years of life left in them.
Gate Repair Cost Breakdown (2026)
When you look at how much gate repair costs in Dallas, TX, you are paying for three things: the technician’s time, the quality of the parts, and the expertise required to fix the issue correctly the first time. In University Park, we deal with specific soil conditions and weather patterns that impact gate longevity. Our pricing is transparent because we know our neighbors expect honesty, not surprises on the final invoice.
| Service Type | Estimated Cost Range |
|---|---|
| Basic Gate Adjustment (Hinges/Alignment) | $180 - $320 |
| On-Site Welding & Structural Repair | $250 - $480 |
| Gate Motor/Opener Diagnostic & Repair | $350 - $650 |
| Logic Board or Control Panel Replacement | $450 - $950 |
| Sensor/Safety Eye Realignment & Wiring | $200 - $350 |
| Remote/Access Control Programming | $150 - $250 |
The ranges above reflect the market in University Park. A simple hinge adjustment often takes an hour, while a complex logic board issue requires specialized diagnostic tools. Because we are locally owned and owner-operated, we do not have the overhead of a national franchise. This allows us to keep our pricing fair. Call (936) 296-2568 to discuss your specific gate issues.
What Affects Gate Repair Pricing in University Park
University Park has specific environmental factors that wear down gates faster than in other climates. We see these issues every day. Understanding what drives the cost helps you make a better decision about whether to repair or replace.
- Foundation Shifting: University Park has soil that expands and contracts with the seasons. This causes gate posts to shift, which throws the gate out of alignment. If your gate is dragging, the fix often involves realigning the post, not just fixing the gate itself.
- Heat and Humidity: Our intense Texas summers bake the electronics in your gate motor. Circuit boards fail faster here than in cooler climates. If your motor is failing, we check for heat damage before recommending a replacement.
- Weight of the Gate: Heavier wrought iron gates, common in older University Park neighborhoods, put more stress on hinges and motors. A heavier gate requires more robust welding and higher-torque motor components, which can increase the cost of parts.
- Previous Poor Workmanship: I often arrive at a job only to find that a previous repair was done with improper welds or mismatched parts. Fixing sloppy work takes more time because we have to undo the mistake before we can perform the actual repair.
- Accessibility: If your gate operator is tucked into a tight space or behind landscaping, it takes us longer to access the components. We always try to keep our labor time efficient, but accessibility matters.
The Repair-First Philosophy
At Gatewood Fence & Gate, our philosophy is simple: if it can be fixed, we fix it. I have been in this business since 2001, and I have seen too many good gates scrapped because a technician didn’t know how to weld or didn’t want to bother with a circuit board repair. When you call us, you are not getting a salesperson. You are getting someone who understands the mechanics of how a gate moves.
We do on-site welding. This is a critical distinction. Many companies will tell you that a cracked hinge or a broken frame requires them to haul the gate away to their shop. That costs you time and money. We bring the welder to your driveway. We fix the frame, reinforce the hinges, and verify the movement right there. If you want to see how we work, you can come down to the shop, or I can show you exactly what I am doing while I am at your home.
This approach saves you money and gets your security back in place faster. A gate isn’t just a convenience; it’s a security risk when it stops working. We treat every repair with that urgency.
How to Save on Gate Repair
You don’t need a massive budget to keep your gate running. We offer several ways to help you save while ensuring the job is done right. Our goal is to be the team you call when you need help, and we make that easy with upfront, honest pricing.
- Don’t Wait: A small sag in a gate leads to a failed motor. If you notice your gate dragging, call us immediately. A $200 adjustment today is cheaper than a $900 motor replacement next month.
- Use Our Standing Offers: We have permanent offers for our neighbors. We offer $40 off any repair over $200. We also provide a permanent 10% discount for seniors and veterans.
- Get a Second Opinion: If you have a written estimate from another company that seems high, call us. We offer a free second opinion on any written estimate. Often, we find that the repair they quoted is unnecessary or can be done for less.
- No Trip Charges: We do not charge a trip fee inside the county. We are local, and we want to keep it simple.
- Call for an Estimate: Don’t guess what the problem is. Call (936) 296-2568. We can often diagnose the issue over the phone and give you a realistic idea of the cost before we even arrive.
FAQs - Gate Repair Cost
How much does it cost to fix a sagging gate in University Park?
Fixing a sagging gate typically costs between $180 and $350, depending on whether the issue is with the hinges, the post, or the frame itself. We always start by checking the hinge and post, because that is where the real problem usually hides. If the post is solid, we can adjust the hinges or reinforce the frame with welding. Call (936) 296-2568 to get a specific quote for your gate.
Is it cheaper to repair or replace a gate motor?
In most cases, it is significantly cheaper to repair a gate motor than to replace it. A motor repair usually costs between $350 and $650, whereas a full system replacement can easily run into the thousands. We specialize in diagnosing specific component failures-like gear assemblies or logic boards-so you don’t pay for parts you don’t need. Call us for a free estimate before you spend money on a new unit.
Can you fix my gate today?
We do our best to provide same-day service for emergency repairs, especially when your security is at risk. Because we are locally owned and answer our own phones 24/7, we can often schedule a technician to get to you quickly. Call (936) 296-2568 right now to see if we have an opening in your area.
What is the 90-Day Done Right Promise?
Our 90-Day Done Right Promise is our guarantee that the work will be completed correctly, and if it isn’t, we make it right at no cost to you. We put this in writing on every invoice because we stand behind our work. It is not buried in fine print; it is a promise from me, Hal Gatewood, to you.
Do you charge for estimates?
We do not charge for estimates. We believe that you should know what you are paying for before we start any work. If you have a gate issue, give us a call at (936) 296-2568, and we will walk you through what needs to be done and what it will cost.
Safety and Gate Maintenance
I have to be clear about this: some parts of a gate system are dangerous. High-tension springs and cables are under immense pressure. If you are not trained to handle them, do not try to adjust or replace them yourself. You can get seriously hurt. If you hear a loud bang or see a cable fraying, keep everyone, including pets, away from the gate and call a professional immediately.
For the rest of the gate, there are things you can check. Look at your hinges. Are they tight? Look at your sensors. Are they free of debris like spiderwebs or leaves? A clean sensor is a working sensor. If your gate is making a grinding noise, stop using it and call us. That noise is the sound of metal grinding on metal, and it is a warning that a small repair is about to become a big one.
We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work on these systems every day, we carry the right parts and have the experience to fix them efficiently.
Why Choose Gatewood Fence & Gate?
When you call us, you are calling a local company that has been around since 2001. My name is on the shop, and my address is published. I am not passing through. I am the person who answers the phone, or one of my team members who knows exactly how I want the work done. We do not have a call center three states away. We do not have a dispatch queue that loses your ticket.
When you have a problem with your gate in University Park, you want someone who knows the area, knows the soil, and knows the climate. You want someone who will show up when they say they will. You want the 90-Day Done Right Promise. That is what we offer.
We are proud to serve the University Park community. Whether you have a simple hinge issue or a complex motor failure, we are here to help. Our goal is to get your gate working properly so you can get on with your day. We handle the repair, we clean up after ourselves, and we stand by our work.
If you are ready to get your gate fixed, call us at (936) 296-2568. If it’s after hours, leave a message or call back-a live person answers every call, 24/7. We look forward to meeting you and helping you get your gate back in working order. For more information on our services, visit our home page or check out our specific Gate Repair in University Park page to learn more about how we handle local repairs.
Pricing reflects the University Park market as of 2026. Gatewood Fence & Gate offers free estimates - call (936) 296-2568. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving University Park since 2001.
What Our Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath