Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lakewood
Gate Installation - Lakewood means working on some of the heaviest, most ornamental ironwork in Dallas. A 1930s estate gate off Tokalon Drive wasn’t built to be swapped for a lightweight aluminum panel. It was built to be repaired, re-welded, and kept true. That’s what we do. Gatewood Fence & Gate has been owner-operated since 2001, and when a Lakewood gate post heaves out of plumb or a welded rail separates from a hinge post, we’re the crew that cuts, re-foots, and re-welds on site. Call (936) 296-2568 and you’ll get Hal or someone from his crew, not a recording.
Why Gatewood Fence & Gate Is Lakewood’s Preferred Gate Parts & Welding Company
Lakewood homeowners don’t want a gate company that shows up with a parts catalog and a pitch for a full replacement. They want someone who understands what Blackland clay does to a gate post over a decade. Hal Gatewood has been looking at ironwork in this neighborhood long enough to know which 1920s-era welds are worth saving and which riveted joints need full fabrication work. The name’s on the shop and on every invoice. That’s the accountability a Lakewood homeowner can actually check.
Our Gate Parts & Welding team welds on site, so your gate stays in your driveway where you can watch the work happen. We don’t haul a heavy custom panel back to some shop across the metro. When you call (936) 296-2568 about a sagging gate near Lakewood Country Club, the person who answers is local, and the person who shows up will tell you honestly whether the post needs re-footing or whether the fix is simpler than you feared.
Every job carries our 90-Day Done Right Promise in writing. Not a verbal assurance. Not fine print. If the weld fails or the gate binds again within 90 days, one call brings someone back. No runaround. That promise matters most in Lakewood, where clay-driven movement can reveal a bad repair within a single wet season.
Our Gate Parts & Welding Services in Lakewood
We see the full range of Gate Parts & Welding in Lakewood, but on the estate properties around White Rock Lake and Gaston Avenue, the work skews toward heavy custom fabrication. Here’s what that looks like.
Hinge Replacement
Lakewood’s clay soil heaves gate posts several inches a year, and the first casualty is almost always the hinge. Not the leaf, not the operator. The hinge pin shears or the barrel egg-shapes because the post moved and forced the panel to carry weight it was never designed for. We don’t just bolt a new hinge onto a post that’s still out of plumb. We re-square the post first, then weld or bolt the new hardware so it actually lines up. A hinge replacement in Lakewood that ignores the post lean is a callback waiting for the next rain.
Post Replacement
When a gate post on a 1920s Lakewood estate has rusted through at the base or been pushed off level by clay movement, replacing it means cutting the old post, breaking out the footing, and pouring a new one that goes deeper than the original local practice. Standard footings around here weren’t engineered for the vertical shift we now know Blackland clay delivers. We pour deeper and let the concrete cure before we re-hang the panel. On custom wrought iron gates, we can scarf in a new post section or replicate the original post cap detail so the replacement doesn’t look like an afterthought.
Rail Repair
A gate panel is only as strong as the welds that tie its rails to its stiles. Moisture off White Rock Lake accelerates rust on period ironwork, and we regularly find rails that have separated from the hinge post because the weld was the first thing the lake air ate. Our repair is a genuine weld repair: we grind back to clean parent metal, bevel the joint, and weld with the right rod for the original material. Then we prime and paint to match. You keep the original gate. You lose the wobble.
Custom Welding
This is where our shop earns its keep in Lakewood. Off-the-shelf hardware doesn’t fit a 1940s ornamental gate with scrollwork and riveted pickets. We fabricate replacement sections, rebuild cracked posts, extend panels, and weld in reinforcement where rust has thinned the material. If a section of scrollwork is rotted through, we can bend and weld a matching replacement rather than telling you to replace the entire leaf. That’s the difference between a repair company and a parts-swapper.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakewood
Lakewood gates often run on Lakewood Gate Motor & Opener systems from LiftMaster and FAAC, and plenty of older estate systems still have BFT hardware underneath. We stock parts for these brands locally and can service them without waiting on a distributor shipment from out of state. Our crew is certified on nine major gate brands, and we keep the most common Lakewood failure parts, hinge pins, rack sections, limit switches, on hand so a repair doesn’t stretch into a multi-day project. When your FAAC operator is binding because the gate post moved, we fix the post and the operator together.
Common Gate Parts & Welding Problems We See in Lakewood Homes
Lakewood gates fail in patterns that are specific to this neighborhood. Here’s what we actually find when we show up:
- Clay heave knocks post-mounted swing gates out of square. The post moves first, the panel binds second, and the hinge pin shears third. Fixing the hinge without re-plumbing the post just repeats the cycle in a few months.
- White Rock Lake moisture eats through period weld joints. Rail-to-stile welds on original 1930s ironwork are often the first place rust penetrates. A gate that still looks solid from the street can have rot you can’t see until the rail separates.
- Automated gate operators bind because the gate frame is racked. When a LiftMaster or FAAC unit starts tripping its safety photocell repeatedly, the first thing we check isn’t the operator. It’s whether the gate leaf is still square to the post. On Lakewood estates, it usually isn’t.
- Older welded footings crack because the soil moves. A gate that seems to droop more in October than in July usually has a footing issue, not a hinge issue. The clay swelled, the footing rotated, and now the whole assembly is off line. That requires cutting the post and re-pouring, not shimming.
Pricing for Gate Parts & Welding in Lakewood, TX
Gate parts and welding prices in Lakewood reflect the weight of the work. A hinge replacement on a standard estate gate typically runs $280 to $650 depending on whether we’re re-footing the post or just re-plumbing the existing hardware. Full post replacement, including breaking out the old footing and pouring a deeper one, runs $800 to $1,600 for a single gate post. Custom welding projects, matching scrollwork or rebuilding a rotted rail section, typically fall between $350 and $1,200 depending on the length and complexity of the weld. We never start a job without a written price you’ve agreed to. No surprises at the door. The quote we give you is the price you pay. Seniors and veterans get 10% off, every job. Call (936) 296-2568 for an exact number after we’ve looked at the gate.
We Also Serve Cities Near Lakewood
Our crews schedule Lakewood work daily, and we regularly run the same routes through Lakewood‘s surrounding communities. If you’re in University Park, Dallas proper, Plano, or Irving, give us a call. Same owner-operated service, same 90-Day Done Right Promise, same live person on the phone at (936) 296-2568.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lakewood
Lakewood’s Blackland clay swells dramatically after rain and shrinks during dry spells, and that vertical movement shifts gate posts by several inches over the course of a year. A gate that closes perfectly in July is binding by October because the post has moved, not because the gate leaf changed. The fix is to cut and re-weld the post base, then pour a deeper footing that sits below the active clay zone. Shimming the hinges or adjusting the operator won’t hold. Call (936) 296-2568 and we’ll check the post lean before we touch the hardware, because in Lakewood the post is the problem more often than the panel.
Yes. Our welders bend and forge replacement scroll sections to match the original pattern, then weld them in and finish to blend with the existing patina. We’ve matched original ironwork on estate gates along Tokalon Drive, Gaston, and Lakewood Boulevard, and we’d rather rebuild a rotted section than replace a gate that was crafted by hand. Bring us the gate and we’ll show you a match before we weld. Estimates are free at (936) 296-2568.
Frequently, yes. When lake moisture and clay movement push a gate frame out of square, the leaf no longer travels true, and the operator’s safety photocell senses the misalignment and stops the motor. We often find the operator is fine but the gate frame has racked because a weld joint is cracked or a post has shifted. Fix the weld and re-square the frame, and the Gate Access Control in Lakewood photocell stops tripping without any operator adjustment. Let us look before you pay for operator parts you don’t need. Call (936) 296-2568.
No, and we’d push back on anyone who says otherwise. A cracked weld at the post base or hinge mount is exactly the kind of repair our shop does daily. We grind down to sound metal, re-weld the joint, and reinforce where the original fabrication was too thin. If the post itself is rotted beyond structural soundness, we can replace the post section while preserving the ornamental gate leaf and its original scrollwork. The point is to save the gate. Call (936) 296-2568 for a straight answer on whether your gate is salvageable.
The gate has to stay square to the post no matter what the clay does, and that takes two things: a post footing deep enough to resist the active soil zone, and a gate frame that resists torsion when the ground moves. We re-foot gate posts below the clay shift line and add gusset plates or reinforcement welds at the hinge and latch corners so the frame doesn’t twist. The operator then only has to move the gate, not fight the frame. On Lakewood estates with heavy custom panels, that’s the only way a LiftMaster or FAAC unit will run quietly year after year. Get a free assessment at (936) 296-2568.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakewood since 2001.