Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Repair in University Park: What to Know First
Linear gate repair in University Park typically runs $225 to $475 for most operator and hinge work, with most jobs finished the same day we show up. We’re an independent Linear service provider, which means we work on your gate in your driveway and quote the price before we touch a single bolt. If your Linear opener is grinding, dead, or refusing to close square, call Gatewood Fence & Gate at (936) 296-2568 and a live person picks up, day or night.
This page is for University Park homeowners who own a Linear swing or slide gate and want straight answers about what’s failing, what it costs, and whether it’s worth fixing. Hal Gatewood has been repairing Linear equipment in this part of Dallas since 2001, and we still answer the phone ourselves.
How Linear Products Fail - and How We Fix Them
- Linear LDO series swing operators blowing control boards. The LDO (Linear Door Operator) line shows up all over the older University Park estates off Preston Road. They’re workhorses, but the boards are sensitive to voltage spikes from nearby lightning strikes, which we get plenty of during spring storms. We replace boards with factory-spec Linear components when available, then add a surge suppressor so the next storm doesn’t cook the new board the same way.
- GTO/Linear PRO series actuators stripping their internal gears. The PRO line, which grew out of the old GTO acquistion, uses a plastic gear train inside the actuator arm. When a gate starts binding because the hinge post moved a quarter inch, that plastic gear is what gives out first. We always check the post before we swap the actuator, because putting a fresh actuator on a gate that’s fighting its own hinges burns out the new one inside a year.
- Linear APeX series losing their limit memory after a power blink. The APeX controllers are smart, but their limit settings are stored in memory that can wipe when power dips hard and comes back rough. You’ll know it happened because the gate opens fine but slams at the end of travel. We reprogram the limits, then test the closed position with a block to make sure the safety reversal triggers like it should.
- Broken hinge welds on heavy Linear slide gates. We see this more on the ornamental steel gates in University Park than anywhere else in Dallas, mostly because the gates are heavy and the columns are old brick. The gate is fine, the operator is fine, and the weld at the hinge is cracked. We weld on site with the gate still hung, true it up, and you’re back in business without hauling anything off.
- Photo-eye misalignment on Linear gate systems. Linear’s photoelectric sensors are durable, but they’re mounted on posts that shift with clay soil movement. A gate that stops halfway and reverses is usually a photo-eye staring at the wrong spot. We realign, shield the wiring from the Texas sun, and test it a dozen times before we leave.
Our Linear Gate Repair Process
When you call, you tell us what the gate is doing. We ask a few questions that get us close to the answer before we even get in the truck, and you get a free estimate before we start. Here’s how a typical Linear repair goes at Gatewood Fence & Gate.
- 1
Listen and look. We test for operator issues, hinge play, wiring faults, power loss, and photo-eye alignment before we start fixing anything.
- 2
Show you what we found. We take you to the gate and show you the exact part that failed and how we’re going to fix it. No mystery, no jargon.
- 3
Decide on parts. On Linear jobs, we default to OEM Linear components. If something’s backordered or discontinued, we’ll tell you, and offer a quality aftermarket part only if we’ve installed it before and trust it.
- 4
Repair it on site. Welding, board replacement, hinge work, limit programming, whatever it needs, done in your driveway. Your gate never leaves the property.
- 5
Test it repeatedly. We cycle the gate a dozen times or more, including obstruction tests on the safety eye. If it fails a test, we run it down before we leave.
- 6
Hand you the promise. Every Gatewood job includes the 90-Day Done Right Promise, in writing. If it’s not right, Hal comes back. No runaround.
What Linear Gate Repair Costs in University Park
We believe in telling you what things cost before we start, which is why the price is quoted and agreed before any work begins. Here’s what University Park homeowners typically pay on Linear equipment:
- Photo-eye realignment and cleaning: $85 to $150
- Limit switch or travel adjustment: $95 to $175
- Control board replacement (LDO/APeX): $275 to $450
- Actuator arm replacement (PRO series): $325 to $525
- Hinge weld repair on a steel gate: $150 to $300 per hinge
- Full swing gate realignment, both posts re-trued: $400 to $700
What moves the price is mostly access and how far the gate has drifted. A gate that’s been sagging for two years costs more than one caught early, because the hinge post needs more work. We offer a free second opinion on any written estimate from another company, and there’s never a trip charge inside the county. Call (936) 296-2568 for an exact quote before any work starts.
Why University Park Homeowners Call Gatewood Fence & Gate for Linear Work
We’ve been fixing gates in University Park since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That’s not marketing, that’s just how we operate. When we tell you the price over the phone, we stick to it. When we say we’ll show up, we show up. And we never recommend replacing a gate that can be repaired, because our first move is to fix what’s in your driveway, not sell you a new one.
We service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing as well, but we go out of our way to stay sharp on Linear, because a lot of University Park homes have had the same Linear opener since the late 90s and they’re not ready to give up on it. Neither are we. Every job carries the 90-Day Done Right Promise, seniors and veterans always save 10%, and any repair over $200 gets $40 off. Hand me your number and I’ll call you back - same day, every time.
FAQs
In most cases, yes. If we have the part on the truck or can source it locally, we finish same-day in University Park. Even if a part has to come in, we typically return within one to two business days to complete the repair. Call (936) 296-2568 to describe the issue, and we’ll tell you over the phone what’s realistic.
The Linear APeX and LDO lines are generally worth repairing, because their failures tend to be isolated to one component. What usually tips the repair toward replacement is structural damage - two broken hinge posts, severe rust through the gate frame, or a gate that has been hit by a car. If we can weld it and rebuild it stronger, we will. If it’s truly done, we’ll say that plainly and show you why. Call (936) 296-2568 for a straight opinion, free.
That’s our first choice, always. On a Linear LDO or APeX system, we install OEM components when they’re available. If a part is discontinued or backordered and you need your gate working now, we’ll offer a quality aftermarket alternative only if we’ve tested it on other jobs and know it holds up. We never swap in a part we wouldn’t put on Hal’s own gate.
Yes, we handle the entire system, from the motor to the safety photo-eyes to the wiring. We also check the reverse function on the gate’s contact edge, because that’s what keeps a neighbor’s dog or a kid on a bike from getting pinned. If a safety test fails, we fix it before we call the job done. Call (936) 296-2568 and we’ll walk you through what to check before we even schedule the visit.
Yes, we replace and retrofit Linear operators, and we’re set up to preserve as much of your existing hardware as we can. If your old Linear motor finally gives up, we can install a new Linear unit or a compatible alternative without replacing the whole gate. We’ll give you the price before any work starts. Call (936) 296-2568 for a free, no-obligation estimate.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate, serving University Park and nearby areas.