Ghost Controls Gate Parts & Welding Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Parts & Welding in University Park: What to Know First

We repair Ghost Controls gate openers and weld the metal around them at your University Park home. Most Ghost Controls parts and welding jobs are done within 24 to 48 hours because we keep common arm assemblies, hinge brackets, and control boxes on the truck. Prices run around $180 to $340 for most repairs, and the price is quoted and agreed before any work starts, never adjusted at the door.

Call (936) 296-2568

This page is for homeowners in University Park who have a Ghost Controls opener on a driveway gate and need someone who actually knows the brand. Not a parts warehouse. Not a phone menu. Gatewood Fence & Gate is a local, owner-operated shop, and Hal Gatewood himself has been working on gates in this part of Dallas since 2001. As an independent Ghost Controls service provider, we’re not tied to the factory’s script. We tell you what’s actually wrong and whether it’s worth fixing. Call (936) 296-2568 and a live person answers.

How Ghost Controls Products Fail - and How We Fix Them

• AXDP and AXD Series arm detachment at the gate bracket. The arm itself is fine, but the bracket bolted to the gate or post gets wallowed out over a few hundred open-close cycles, especially on heavier wood driveway gates. The fix is usually a fresh bracket plus reinforcement plate, not a whole new opener. We weld the bracket to the post when the wood or masonry won’t hold a lag anymore, which saves hundreds over replacing the operator.
• DTP and TSS series hinge wear that throws the gate out of square. University Park lots run to older brick columns, and those columns settle. When the column moves even a quarter inch, the Ghost Controls arm has to work harder and the hinges start to bind. We weld new barrel hinges or leaf hinges in place, sometimes with a small steel shim, to get the gate swinging clean again. If you see the gate scraping the ground on the latch side, it’s almost always a hinge or post problem, not the motor.
• Gate post fatigue at the welds. Ghost Controls openers pull hard, and many University Park gates are heavy ornamental iron. The welds where the hinge plates meet the post are the first thing to crack. We cut out the old weld, clean the base metal, and run a proper bead, then reinforce the back side so it doesn’t crack again next summer.
• OEM vs aftermarket arm assemblies. Ghost Controls sells arms and brackets as matched sets, and the aftermarket cheapies often don’t pin the same or hold tension. For any repair under warranty, we use Ghost Controls parts only, no discussion. Once the warranty’s out, we’ll offer you the OEM part plus a quality aftermarket option with our honest take on how long each will last in University Park heat.
• Gate roller and rail problems on slide gates. Ghost Controls is better known for swing arms, but we see their slide operators on ranch-style properties in north University Park. If the rollers wear flat or the rail gets a dip from tree-root heave, the opener starts tripping the reverse sensor for no apparent reason. You replace the board thinking it’s electrical, and it was the rail all along. We check the rail first on any Ghost Controls slide job.

Our Ghost Controls Gate Parts & Welding Process

Here’s what a Ghost Controls parts and welding job looks like when you call Gatewood Fence & Gate in University Park:

1. 1
   You call, Hal or someone on his crew answers the phone. No menu, no hold music. We’re local.
2. 2
   We come out and look. We check the arm, brackets, hinges, posts, chain or rail, and the control board. We don’t guess. We find the actual reason your gate is fighting back.
3. 3
   You get a written price before anything is touched. It includes the part, the weld time, and the labor. That number is the number. No surprise add-on for a “trip fee” or a “shop rate adjustment.”
4. 4
   We do the work in your driveway. Welding, bracket replacement, rail fix, hinge rebuild. The gate stays at your University Park home. We don’t haul it off unless you want it hauled off.
5. 5
   We test it. The latch catches clean, the opener cycles smooth, the gate doesn’t sag or scrape. We run it open and closed enough times that you get tired of watching, not because we’re slow, but because we’d rather catch a bad weld in your driveway than have you find it next month.
6. 6
   The 90-Day Done Right Promise goes on the invoice in writing. If it’s not right, call us. One call brings Hal back. No runaround.

What Ghost Controls Gate Parts & Welding Costs in University Park

Most Ghost Controls repairs in University Park land between $180 and $340. That’s the honest range for bracket replacement, hinge weld-outs, arm re-tensioning, and roller swaps. A full post replacement, where we dig out the old footing and set a new steel post in concrete, runs $450 to $900 depending on the column and whether brickwork is involved. Replacing an entire Ghost Controls arm and bracket assembly with OEM parts is usually $220 to $380 installed.

What moves the price is three things: whether the post itself is compromised, whether the gate has to be lifted off and re-hung, and whether you want OEM Ghost Controls parts or a quality aftermarket equivalent. We show you both numbers before you decide. And right now, a $40 discount on any repair over $200 applies, with no trip charge inside the county. Call (936) 296-2568 for a free estimate.

Why University Park Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood grew up not far from Goar Park, so he knows University Park gates and University Park soil. He learned welding and metal fabrication at Eastfield College and has been fixing gates in this part of Dallas since 2001. The name’s on the shop and the shop address is published, which means when something goes wrong, you know where to find him.

We fix Ghost Controls, but we also service LiftMaster, Mighty Mule, and DoorKing, so if you ever swap brands or need a second opinion on a different opener, the person who shows up already knows what he’s looking at. Every call is answered by a live person, every job is covered by the 90-Day Done Right Promise in writing, and seniors and veterans get a permanent 10% discount. We don’t do vague. Hal would rather tell you the gate’s not worth fixing than sell you a part you don’t need.

FAQs