Ghost Controls Gate Motor & Opener Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Motor & Opener in University Park: What to Know First

We install, repair, and service Ghost Controls gate motors and openers across University Park, Texas, and we do it as an independent Ghost Controls service provider. Most Ghost Controls repairs in this area take us one visit, and we quote the price before any work starts, so the number we give you is the number on the invoice. If you have a Ghost Controls opener that won’t respond, a gate that stops halfway, or an arm that has pulled loose from the post, call (936) 296-2568 and a live person answers, day or night.

Call (936) 296-2568

This page is for the University Park homeowner standing in the driveway with a Ghost Controls opener doing something it should not be doing. Whether you bought the opener yourself, inherited it when you bought the house, or a builder put it in, we know the quirks of this brand, and we won’t try to sell you a replacement when the fix is two parts and an adjustment.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes a solid opener, but every brand has its weak points, and in University Park we see the same handful of failures repeat themselves. Here is what actually happens on the ground.

• Low-voltage power issues on the AXD series. The Ghost Controls AXD (Automatic Exit Device) line is common on University Park driveway swing gates, and the most frequent culprit when the operator goes dead is not the motor itself, it’s the transformer or the battery terminals. We test the power feed before we ever touch the arm, because roughly a third of “dead opener” calls we get on Ghost Controls units turn out to be a failed transformer or a battery that has cooked in the Texas heat. The transformer sits in a plastic housing that gets brittle after enough Dallas summers, and once the housing cracks, moisture creeps in and the transformer quits.
• Arm sag or “gate creep” on the AS100/AS200 swing arm openers. These arms rely on a clamp that grabs the gate post, and on brick or stone columns in University Park, that clamp works loose over time. The opener still runs, but the gate stops short or overshoots. Some companies will tell you it needs a new arm. In most cases, we re-seat the mounting clamp, shim the gap, and reset the limits in under an hour. A new arm is the last resort, not the first move.
• Sensor drift on the single-panel slide gates. Ghost Controls slide motors on single-panel gates have an integral obstruction sensor, and after a few years it drifts. The gate starts stopping for no visible reason, or reverses when nothing is in the way. This is a calibration and cleaning fix, not a motor replacement. We remove the cover, clear the debris and earwig nests (they love the warm cavity), and re-zero the sensor. Saves the homeowner the cost of a new board.
• Battery backup failure on dual-gate setups. University Park homes with double swing gates often have a Ghost Controls battery backup system, and those batteries last about three to five years in our climate. When the battery dies, the opener runs fine on AC power but goes dead the moment the power flickers. We stock and install quality replacement batteries that fit the Ghost Controls tray, and we test the charging circuit while we’re in there. A charging circuit that never reaches full voltage kills a new battery in six months.
• Remote range problems on the XR series. The Ghost Controls XR receivers are generally dependable, but range drops when the antenna lead is routed behind a steel post or when the receiver board starts getting RF interference from a nearby cell booster. We relocate the antenna wire, check for pinched or frayed sheathing, and if the board has failed, we replace it with a verified Ghost Controls part so you keep your existing remotes.

Our Ghost Controls Gate Motor & Opener Process

When you call us about a Ghost Controls opener in University Park, here is how the job goes from start to finish.

1. 1
   We answer the phone. A live person, not a voicemail tree. We ask what the gate is doing, how long it’s been doing it, and the model number if you can find it.
2. 2
   We diagnose the opener in place. We don’t pull the motor and haul it off. We check power, battery, board, limit switches, and the arm or slide track right there in your driveway.
3. 3
   We decide parts with you. If it needs a Ghost Controls OEM part, we quote it. If a quality aftermarket part is the smarter call for an older unit, we say so and show you the difference on the spot. No surprises at the end.
4. 4
   We fix it or we replace it, and we explain which one makes sense. A stripped gear inside the motor body is usually a swap. A dead transformer or a drifted limit switch is a repair. We won’t put a new opener on your gate when the one you have needs a $45 part.
5. 5
   We test the full cycle. The gate has to open and close smoothly with no chatter, no strain, and the safety reversal has to work. We test it at least five times, including once with an obstruction in the path.
6. 6
   We hand you the invoice with the 90-Day Done Right Promise in writing. If anything we touched acts up within 90 days, you call us and we come back out. That’s not a maybe, it’s printed on the paperwork.

What Ghost Controls Gate Motor & Opener Costs in University Park

Straight numbers, because that’s the only way to talk about money. Here is what most Ghost Controls work on University Park gates lands at, plain talk in 2026 dollars.

• Transformer replacement: $80 to $170 installed
• Battery replacement (single battery tray): $95 to $190 installed
• Limit switch calibration and adjustment: $95 to $155
• Mounting clamp re-seat and shim (swing gate arm): $120 to $220
• Receiver board replacement (XR series): $170 to $310
• Full Ghost Controls motor replacement (homeowner supplies unit): $280 to $450 labor
• Order and install new Ghost Controls opener (single gate): $720 to $1,150 all-in

The variables are the gate weight, the post condition, and whether any wiring has to be pulled. If your University Park home has a heavy ornamental iron gate, the motor has to work harder and the clamps have to be set right, which takes a little more time. We give you a firm quote before we turn a tool, and we don’t add on at the end. Call (936) 296-2568 and we’ll give you a straight number for your specific setup.

Why University Park Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

I started Gatewood Fence & Gate in 2001, and I’ve been working on gates in this part of Dallas since before a lot of University Park’s newer neighborhoods were fully built out. My name is on the shop, my address is published, and if you want to look me in the eye before you hire me, you can drive down and do exactly that. Hal Gatewood is not a franchise name, it’s me.

Every Ghost Controls job we take gets the same treatment: a person who knows this brand shows up, says what it needs and what it doesn’t, then does the work right there. We weld on site when a bracket has torn away from the post, because hauling a gate to a shop means you go days without a secure property. And if the Ghost Controls opener is beyond saving, we also service LiftMaster, Mighty Mule, and DoorKing, so we can move you to a different brand without talking you into an upsell you don’t need. The 90-Day Done Right Promise applies to every Ghost Controls job, every time.

Does Ghost Controls warranty apply if you service my opener?

As an independent provider, we work on Ghost Controls openers without invalidating your manufacturer warranty as long as the failure is not caused by our repair. If warranty coverage is a question on a newer unit, we will tell you before we open anything up and help you get the manufacturer’s blessing on the repair path. Our 90-Day Done Right Promise stands behind our work either way.

Can you get Ghost Controls parts in University Park?

Yes, we source genuine Ghost Controls parts and board-level components directly, and we keep the common wear items in the truck: transformers, clamps, remotes, and batteries. For a discontinued Ghost Controls model, there are times a quality aftermarket part is the only practical move, and we will be straight with you about what that means for lifespan before we install it.

How fast can you get to my University Park gate?

We answer the phone 24 hours a day, and for a gate stuck open or stuck closed, we make it the same day whenever we’re in the county. Hand me your number and I’ll call you back, same day, every time.

Do you recommend repairing or replacing older Ghost Controls openers?

If the motor body is intact, repair is usually the honest move. A Ghost Controls opener can run for 15 or more years if the transformer, battery, and clamps are maintained. We will only recommend replacement when the motor itself has seized or the board has failed on a unit where the parts cost is close to the price of a new opener, and we’ll show you the numbers so you can decide.

Will you service a Ghost Controls opener on a heavy iron gate?

Yes, and that’s the bulk of what we see in University Park. We set arm clamps for the actual weight of your gate, not a guess on a spec sheet, and we test the full cycle with the gate hung and weighted. That last step is what keeps a heavy gate from eating a new opener in two years.

Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving University Park and nearby areas.