Ghost Controls Gate Access Control Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Access Control in University Park: What to Know First

We repair and service Ghost Controls gate access control systems throughout University Park, TX - keypads, remote receivers, phone entry, card readers, and video intercoms. Most Ghost Controls access jobs are diagnosed and fixed in a single visit, and you’ll know the price before we turn a wrench. As an independent Ghost Controls service provider, we’re not beholden to a manufacturer’s script - we’re beholden to getting your gate opening when you pull up. If you’re in University Park and your Ghost Controls keypad is dead, your remotes stopped pairing, or the gate only opens when it feels like it, call (936) 296-2568 and we’ll talk through what you’re seeing.

Call (936) 296-2568

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds a solid residential operator, but gate access control is where we see the most repeat trouble. Here are the failures that show up on University Park gates:

• Ghost Controls keypad dead after storms (AXDP series). The factory keypad enclosure on the AXDP and TSS1 keypads doesn’t always shed water the way it should after a hard Texas downpour, and University Park gets plenty of hard Texas downpour. Moisture gets into the membrane and the contacts corrode. We swap in a sealed aftermarket housing and weatherproof the wire entry so the new keypad outlasts the old one.
• Remotes losing programming on the HDP1 and TDS1 openers. Ghost Controls receivers occasionally dump their stored remote codes after a power surge or a lightning strike nearby. Homeowners assume the remote battery died, replace it, and still get nothing. We re-flash the receiver, load the remotes back in, and add a surge protector to the board so it doesn’t happen again on the next storm.
• Phone entry module not tripping the opener (Ghost Controls cellular/intercom add-ons). The phone-entry integration on some Ghost Controls systems loses communication with the main board when the wiring connection oxidizes, especially in high-humidity months. The caller rings through, the gate never opens. We clean and re-seat the board connections, then seal the control enclosure properly against the North Texas humidity.
• Photo eye sensors tripping the gate for no reason (part of the access safety loop). Ghost Controls sensors get dirty or misaligned and the gate refuses to close or reverses halfway. Sometimes a lizard or mud dauber nest behind the sensor bracket is the culprit. We clean, realign, and if the sensor legs are cracked from a mower bump, we replace them with a sturdier bracket.
• Keypad works but the gate moves in jerks (control board capacitor failure). An older Ghost Controls board with a swollen capacitor will send inconsistent voltage to the motor. The keypad beeps, the relay clicks, the gate shudders and stops. We replace the capacitor, test the board under load, and you’re back in business without buying a whole new operator.

Our Ghost Controls Gate Access Control Process

Here’s what happens when you call Gatewood Fence & Gate for a Ghost Controls access problem in University Park:

1. 1
   You call (936) 296-2568. A live person answers. We ask what the keypad, remote, or phone entry is doing - and not doing.
2. 2
   We show up in the window we gave you. Hal grew up near Goar Park, so he knows the streets here. We don’t waste your afternoon.
3. 3
   We test the whole circuit, not just the part that looks broken. A dead keypad might be a keypad, or it might be a shorted wire underground. We find the actual fault before quoting anything.
4. 4
   You get a price before we touch a tool. We’ll tell you what parts are needed, whether OEM or a quality aftermarket part makes more sense, and what it’ll cost. You approve it first.
5. 5
   We fix it on-site, test it through ten full open-close cycles, and walk you through the programming. We don’t leave until the keypad, remotes, and phone entry all work.
6. 6
   You get the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No fine print, no runaround.

What Ghost Controls Gate Access Control Costs in University Park

Here are honest ranges for common Ghost Controls access jobs we do in University Park. These are labor-and-parts ballparks, not door-to-door surprises:

• Single keypad replacement (aftermarket, weather-sealed): $180-$340
• Remote programming or re-flash (up to 3 remotes): $95-$160
• Control board repair (capacitor/relay level): $220-$420
• Photo eye replacement and alignment: $130-$260
• Full phone entry module install or replacement: $450-$850

What moves the price: whether we’re fixing a board or replacing it, whether your wiring is buried under a flower bed, and whether you want OEM Ghost Controls parts or quality aftermarket parts that fit better for less money. We’ll quote the job before any work starts. Call (936) 296-2568 for a free estimate - and you’re welcome to drive by the shop first and meet us in person.

Why University Park Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

My name is on the shop, and the shop is down the road - that’s the oldest accountability there is. We’ve been fixing gates since 2001, and we’ve spent a lot of those years undoing sloppy work other companies left behind on University Park driveways. We work on Ghost Controls every week, but we also service LiftMaster, Mighty Mule, and DoorKing - so if your Ghost Controls unit turns out to be better off replaced with a different brand, we’ll tell you straight instead of trying to make a dying board survive another summer. Every job comes with the 90-Day Done Right Promise in writing. And when you call, a person answers - not a voicemail, not a call center. We know a gate that won’t open feels like a security problem first and an inconvenience second, so we handle it like one.

FAQs