FAAC Gate Repair Nationwide | Gatewood Fence & Gate

FAAC Gate Repair in University Park: What to Know First

FAAC gate repair in University Park runs $185 to $640 on most jobs, and we can usually have your gate cycling properly within 24 to 48 hours of the first call. We’re an independent FAAC service provider, which means we answer to you, not to a manufacturer’s warranty department. If your FAAC opener is dead, your gate is sagging, or the leaf won’t latch, call (936) 296-2568 and you’ll get a live person, not a voicemail tree.

Call (936) 296-2568

This page is for University Park homeowners who own a FAAC gate system and want it fixed by someone who knows the brand without paying dealership pricing. Hand me your number and I’ll call you back - same day, every time.

Key Takeaways

• Most FAAC gate failures in University Park trace back to three things: capacitor failure from heat, limit switch drift, and hinge/post wear from clay soil movement.
• We repair first. If a board can be rebuilt or a hinge can be welded, we’re not going to sell you a new operator.
• Every FAAC job carries our 90-Day Done Right Promise in writing.
• We’re certified on nine brands, so if your FAAC system turns out to be mixed-brand (FAAC operator, LiftMaster keypad, Mighty Mule edge sensors), one call handles all of it.
• Upfront pricing, always. The number we quote on the phone is the number on the invoice unless we find something structural we couldn’t see from the driveway.

How FAAC Products Fail - and How We Fix Them

FAAC makes a solid operator. We’ve been fixing them in University Park since 2001, and the failures we see are predictable once you know the brand. Here’s what actually goes wrong and what we do about it.

• Capacitor failure on 400 and 402 series operators. University Park summers cook capacitors. The FAAC 400 and 402 series use a start capacitor that sits inside a housing that doesn’t breathe well in 100-degree heat. The symptom is a gate that hums but doesn’t move, or moves slow in the afternoon and fine at night. We replace the capacitor with a higher-temperature-rated unit and clean the housing vents while we’re in there. It’s a $190 to $260 fix, not a new operator.
• Limit switch drift on S418 and Slide 750 models. FAAC limit switches are mechanical, and mechanical parts wear. What you’ll notice is the gate stopping six inches short of fully closed, or over-traveling and slamming the stop. We see this on slide gates along Preston Road and in the older neighborhoods south of University Boulevard. We reset and replace the limit switch assembly when needed, then run the gate through twenty cycles to make sure it holds.
• Hinge and post wear on swing gates with FAAC 391 and 415 operators. The clay soil in University Park expands and contracts with moisture. That movement slowly torques gate posts out of true, and a heavy ornamental gate leaning on a FAAC 415 will eat hinges. The gate sags, the operator strains, and eventually the board faults out on overload. We weld the hinge back to post, reset the gate leaf, and often add a gusset plate so the hinge doesn’t tear again. Fix the panel without the post and you’ll fix it twice.
• Board failure caused by power surges on FAAC E024U control boards. FAAC boards are sensitive to surges, and University Park gets more than its share of lightning and grid flicker. The classic call is “the gate just stopped, no lights, no nothing.” We check the board, replace it with a genuine FAAC board when available, or a tested aftermarket board when the OEM lead time is two weeks and you need your gate working now. We’ll always tell you which one we’re putting in and why.
• Photocell and edge sensor faults on FAAC systems with mixed-brand accessories. A lot of University Park homes have FAAC operators paired with a different brand’s safety edge or photo eyes. When the gate reverses for no reason or refuses to close, the problem is usually a dirty or misaligned photo eye, or a safety edge that’s been pinched in the track. We clean, realign, and test the whole safety circuit. If the edge sensor is shot, we stock replacements that meet UL 325 safety standards.

Our FAAC Gate Repair Process

When we get a FAAC call from University Park, here’s how the job goes from start to finish.

1. 1
   The call. You talk to a live person. We ask what the gate is doing, what model you have if you know it, and whether it’s swing or slide. We give you a rough price range on the phone so nothing is a surprise.
2. 2
   The visit. Hal or one of the crew shows up in the window we gave you. Background-checked, uniformed, and carrying a meter, not just a parts catalog. We test the board, the capacitor, the limit switches, the safety circuit, and the mechanicals.
3. 3
   The decision. We tell you what’s actually wrong and what it costs to fix. If the board is repairable, we say so. If a hinge needs welding, we weld it in your driveway. If a part needs ordering, we tell you the lead time before we order it.
4. 4
   The repair. We source OEM FAAC parts and a short list of quality aftermarket parts we trust, and we’ll tell you which one you’re getting and why. No mystery parts, no “trust us” pricing.
5. 5
   The test. We cycle the gate at least twenty times, check the force settings, verify the auto-reverse works, and make sure the latch catches clean. We watch the operator for overheating and listen for strain.
6. 6
   The guarantee and cleanup. You get the 90-Day Done Right Promise in writing on the invoice. We sweep the area, bag the old parts, and make sure the gate opens and closes like it should before we leave.

What FAAC Gate Repair Costs in University Park

Here are real numbers for the FAAC jobs we do most often in University Park. These are the prices we actually quote, not internet teaser rates.

• Capacitor replacement, FAAC 400/402 series: $190-$260
• Limit switch replacement and reset, S418 or Slide 750: $240-$340
• Control board replacement, E024U: $420-$640 depending on OEM vs. aftermarket board
• Hinge weld repair and gate realignment, swing gates: $310-$520 depending on gate weight and hinge condition
• Safety edge or photocell replacement and realignment: $185-$295
• Full operator swap, labor included, FAAC 415 or 391 replacement: $1,850-$2,900 depending on gate size and access

What moves the price is gate weight, post condition, and whether the old operator was installed clean or somebody made a mess we have to undo. We quote the job before we start, and the price doesn’t change unless we find structural damage we couldn’t see. Estimates are free. Call (936) 296-2568 and we’ll come out, look, and put the number in writing.

Why University Park Homeowners Call Gatewood Fence & Gate for FAAC Work

We’ve been fixing gates in University Park for over 29 years, and we’ve been owner-operated since 2001. Hal Gatewood’s name is on the shop, and the shop is down the road - that is the oldest accountability there is. We answer the phone with a live person 24 hours a day, 7 days a week. Not a voicemail. Not a call center. A person.

On every FAAC job we do, you get the 90-Day Done Right Promise stamped in writing. If it’s not done right, one call brings us back, no runaround. We also service four other brands you may have on the same property: LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. So if your gate system is FAAC at the opener but something else at the keypad, one call handles it. And we won’t try to sell you a new gate unless yours is genuinely beyond saving. We’d rather weld than replace, and we’d rather fix than upsell.

FAQs