Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterBFT Gate Access Control in University Park: What to Know First
We repair, replace, and upgrade BFT gate access control systems across University Park, TX, and most jobs are done within one to two business days depending on parts. If your BFT keypad is dead, your remote won’t open the gate, or your phone entry system stopped calling your cell, call (936) 296-2568 and a live person answers, day or night. We’re an independent BFT service provider. We’re not a BFT dealer, and we don’t pretend to be one. What we are is a locally owned shop that has been fixing gates in this part of Dallas since 2001, and we fix BFT equipment the right way: in your driveway, with the old part in hand so you can see exactly what failed and why.
This page is written for the BFT owner in University Park who wants to know why the access control failed, what it should cost to fix, and whether the whole system needs replacing or just one honest part. If that’s you, keep reading. And if you’d rather just talk to a person, call the number above.
How BFT Products Fail - and How We Fix Them
BFT builds solid gate operators, but their access control components fail in predictable ways. Here’s what we actually see on BFT jobs in University Park:
- Phobos and ARIES keypads going dead after heavy rain. The keypad housing seals degrade over time, especially on north-facing gate posts that stay damp. Water gets in, the membrane corrodes, and the keypad stops registering numbers. We open the unit, clean the contacts, and replace the membrane rather than selling you a whole new access panel. In University Park, where storms come through fast and leave standing moisture, this is the single most common BFT access failure we fix.
- BFT remote controls losing range or failing unpredictably. Older BFT Mitto series transmitters drift off frequency as their internal components age. The gate still works from 15 feet away but not from the street. We bench-test the transmitter, and if it’s drifted, we reprogram or replace it with an OEM BFT remote rather than a universal that’ll fight the receiver.
- Phone entry systems that ring but won’t unlock the gate. This shows up on BFT systems with an add-on GSM or landline module. The module picks up the call, but the relay that triggers the opener has burned out or the wiring between the module and the control board has a bad connection. We trace the circuit, replace the relay or repair the wire run, and test the unlock function five times before we leave.
- Card readers with intermittent reads on BFT Deimos or Kustos controllers. The problem is rarely the reader itself. It’s usually a failing power supply inside the control cabinet, dipping voltage just enough that the reader can’t hold a read. We load-test the supply, replace it if needed, and the reader comes back to life without a new reader. That’s the kind of diagnosis that saves you $300 to $400 over what a parts-swapper would charge.
- Keypad wired into an opener that works manually but not from the keypad. This is a wiring issue, not a keypad issue, on almost every BFT job where the gate arm moves but the access code does nothing. The installer who came before us often used wire nuts outdoors without grease, and the connection corroded inside the nut. We cut the bad section, solder and heat-shrink the splice, and the keypad talks to the board again.
Our BFT Gate Access Control Process
When you call us about a BFT access control problem, here’s how the job goes, start to finish:
- 1
Call and describe the symptom. You talk to a person. We ask what it’s doing, what it’s not doing, and what equipment you have. If you know the model, great. If not, we’ll figure it out when we’re there.
- 2
Diagnose on-site, not over the phone. We show up, open the control cabinet, and test the board, the power supply, the wiring, and the access device itself. Hal Gatewood has been doing this since 2001, and he usually knows what’s wrong within 20 minutes of seeing the install.
- 3
We show you what failed and quote you before we touch anything else. The price is agreed before work starts. No surprises at the end.
- 4
We repair with the right part. If your BFT system is under manufacturer warranty, we’ll recommend OEM parts and document the work so your warranty stays intact. If it’s out of warranty, we’ll tell you when a quality aftermarket part makes sense and when it doesn’t.
- 5
We test everything, repeatedly. The keypad gets tested at the gate and from the street. The remote gets tested at range. Phone entry gets called from our phone. The gate cycles clean without slamming or stopping early.
- 6
We leave it right and you get it in writing. Every job carries our 90-Day Done Right Promise. If something isn’t right after we leave, one call brings us back.
What BFT Gate Access Control Costs in University Park
Here’s honest pricing for the BFT access control jobs we do in University Park. These are real ranges, not teaser numbers:
- Keypad membrane replacement or contact cleaning: $145-$265
- BFT OEM remote replacement with programming: $85-$140
- Relay replacement on phone entry or card reader circuit: $190-$340
- Power supply replacement in BFT control cabinet: $220-$390
- Full access control upgrade (new keypad, relay, wiring, programming): $550-$1,100
What moves the price is how far the access device is from the control board, whether the cabinet needs corrosion cleanup, and whether we’re working with OEM BFT parts or a quality aftermarket equivalent. You’ll know the exact number before we start, and estimates are free. That’s not a maybe. Call (936) 296-2568 and we’ll come look.
Why University Park Homeowners Call Gatewood Fence & Gate for BFT Work
We’ve been locally owned and owner-operated since 2001. The name on the shop is Hal Gatewood, the address is published, and the license number is there for anyone to look up. You’re not getting a faceless national crew that quoted one price on the phone and handed you a different invoice on the driveway.
We fix gates. We don’t push replacement when a repair will hold, and we weld on site so your gate never has to leave your property. When your BFT access control is down and you can’t get in or out without getting out of the car, you need someone who will show up. We answer the phone around the clock, and we stand behind every job with a written 90-Day Done Right Promise.
And if you end up needing something for a different brand, we service those too: LiftMaster, Mighty Mule, Ghost Controls, DoorKing, FAAC, Viking, Linear, and Elite. But on this page, the focus is your BFT system and getting it to work like it should.
FAQs
Most BFT keypad repairs are done same-day when we can get to you. If the keypad membrane needs replacing and we don’t have the exact part on the truck, we’ll have it ordered and installed within a day or two. Call (936) 296-2568 in the morning and you’ll know exactly when we can be there.
In most cases, no. We use OEM BFT parts where a warranty is active, and we document our work so you can show the manufacturer exactly what was done. We’re an independent BFT service provider, so we follow manufacturer specifications rather than cutting corners that would put your coverage at risk.
Depends on what failed. If your keypad membrane is worn or a relay is burned out, repair usually makes sense and costs far less. If your control board has failed and the operator is 15 years old, we’ll tell you honestly and show you the numbers both ways. We’ll never push a replacement because we make more money that way. We’d rather earn your next call.
We keep the most common BFT repair parts in the truck and in the shop: Mitto remotes, keypad membranes for Phobos and ARIES models, relays, and power supplies. Less common parts we can usually have within a day or two. If it’s backordered from the manufacturer, you’ll know that up front, not after we’ve taken your gate apart.
Hand me your number and I’ll call you back - same day, every time.
Ready to get your BFT gate access control working again? Call Gatewood Fence & Gate at (936) 296-2568 for a free estimate. A live person answers, and we’ll be there when we say we will.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving University Park and nearby areas.