Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Addison
Gate access control repair in Addison usually comes down to one question: can the existing operator be saved, or does the whole thing need replacing? Honest answer: most of the time we can fix it on site, and that’s what we’d rather do. We work the apartment corridors along Quorum Drive, Belt Line Road, and the office park strips around Addison Circle every week. Older slide gates, failed control boards, loop detectors that quit reading cars, keypads that stopped talking to the operator. If you’re managing a property in Addison and a gate is down, call Hal Gatewood at (936) 296-2568. A live person answers, and we’ll tell you straight what it’ll take.
Why Gatewood Fence & Gate Is Addison’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s not a slogan. It means when something isn’t done right, the person you call is the same person who owns the business, and he’ll come back. Every job we do in Addison carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back. No runaround, no “let me check with my supervisor.”
We answer the phone 24 hours a day, seven days a week, with a live person. Not a voicemail, not an automated menu. When a gate is down at 2 a.m. and residents are tailgating through, you talk to someone who actually knows gates. We also carry a no trip charge inside the county, so if you’re in Addison and you want us to come look at a failing operator, you’re not paying us just to show up.
Our Gate Access Control team works Addison regularly. We know which apartment complexes along Quorum Drive have original Viking operators from the 1980s, and we know which office park gates on Belt Line get hundreds of vehicle cycles a day. That local knowledge saves our Addison customers time and money because we show up already understanding the property’s history.
Our Gate Access Control Services in Addison
Keypad Entry
Keypads in Addison take a beating. Heat, rain, and hundreds of fingers a day. When a keypad stops reading codes, sometimes it’s a failed membrane, sometimes it’s a control board issue, and sometimes the wiring between the keypad and operator has corroded. We diagnose the actual problem. A replacement keypad in Addison typically runs $250-$500 installed, depending on whether we’re matching an existing enclosure or running new wire.
Remote Control
Access remotes and receiver boards fail faster in North Texas than manufacturers claim, mostly from heat and power surges. If your Addison gate stopped responding to remotes but the keypad still works, that’s usually a receiver issue. We service LiftMaster, Linear, Viking, and FAAC receivers, and we can often install a new receiver and program existing remotes the same trip. Receiver replacement typically runs $180-$350.
Phone Entry
Phone entry systems, often tied to a call box or cellular unit, are common on older Addison apartment complexes and office parking lots. The phone line degrades, the cellular modem loses registration, or the relay that triggers the gate stops firing. We troubleshoot end to end. Replacing a phone entry controller in Addison typically runs $350-$700, and we’ll tell you upfront whether rebuilding the existing unit is cheaper than replacing it.
Card Reader
Card readers and proximity systems are standard on Addison office parks along Belt Line and the commercial buildings off Arapaho. Failing readers usually trace back to wiring, a bad power supply, or a controller that’s lost its programming. We test the reader at the device, then at the board, so we’re not guessing. Card reader replacement in Addison runs $200-$450 for the reader itself, plus labor if we’re pulling new wire.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We’re certified to service nine major gate brands, including FAAC, Viking, Linear, and BFT, all of which show up on older Addison properties. We stock common boards, receivers, and safety components locally, so when a Viking slide operator on Quorum Drive dies, we’re not waiting a week on a shipped part. Hal welds on site and keeps enough inventory to handle most Addison service calls in one trip. If a board is obsolete, we’ll tell you honestly whether a retrofit makes sense or whether replacement is the cheaper path.
Common Gate Access Control Problems We See in Addison Homes
- Legacy operators without a dedicated neutral. Many 1980s and 1990s slide gates along Quorum Drive were wired without a neutral conductor. Modern access control boards need one. If you’re the second or third owner of an older Addison property, expect a rewire before a new board can be safely installed. We do the compliant circuit pull as part of the job.
- Blackland Prairie clay shifts gate posts. Addison sits on expansive clay that swells in wet springs and shrinks in 105°F summers. Posts heave, racks misalign, and motors strain. A gate that grinds when it opens may not have a bad motor. It may have a post that moved a quarter inch. We check plumb before we condemn anything.
- UV-degraded safety components. Photocell lenses, nylon rollers, and wiring insulation break down faster at this latitude than manufacturer cycle ratings predict. The result is nuisance entrapment faults, especially on south-facing gate posts. If your gate reverses for no reason in summer, the sun may have cooked the safety circuit.
- Loop detectors that stop reading vehicles. Addison commercial gates see hundreds of cycles a day. Loop detectors fail from cracked pavement, lightning strikes, and plain age. When a gate won’t open for a car but opens for a keypad, the loop is the first thing we test.
Pricing for Gate Access Control in Addison, TX
Addison gate access control pricing breaks down roughly like this: keypad replacement $250-$500, receiver replacement $180-$350, phone entry controller $350-$700, card reader $200-$450, loop detector replacement $350-$600, and a full slide gate operator replacement runs $2,800-$5,500 depending on the operator. A rewire to bring an old circuit up to code typically adds $400-$1,200, and that’s the line item people don’t see coming on older Addison properties. The price we quote is the price you pay, agreed before any work starts. That’s not a sales pitch; it’s how Hal has run the business since 2001. We offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Addison
While this page focuses on Gate Access Control in Addison, our crews also serve Richardson, Coppell, Plano, and Dallas. If your property sits just outside Addison, give us a call and we’ll confirm coverage. Same live person, same 90-Day Done Right Promise.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Addison
Because the original 1980s and 1990s installations along Quorum Drive and Belt Line Road were frequently wired without a dedicated neutral conductor, which was common practice then but violates current NEC requirements. Modern access control boards won’t run reliably without one, and installing one on a circuit without a neutral is unsafe. The fix is a compliant rewire, typically $400-$1,200 depending on conduit access and run length. Call (936) 296-2568 and we’ll inspect the circuit before quoting a board replacement, so you’re not surprised mid-job.
Sometimes. If the Viking motor and gearbox are still sound and the gate tracks properly, a smart access board retrofit can make sense. It typically runs $800-$1,800 with the rewire. But if the motor is 25 years old and the rack is worn from clay heave, retrofitting is money into a machine that’s near the end anyway. We’ll tell you which one you’re looking at and quote both paths so you can decide with real numbers. Free estimates, no trip charge in Addison.
Blackland Prairie clay swells and shrinks with North Texas weather. When the ground moves, gate posts move. When posts move, the gap between safety sensors and reflectors shifts, and the gate faults. When the rack shifts, the motor pulls more current and the control board eventually burns a relay. We check post plumb and track alignment before blaming the sensor. On Belt Line Road, where gates run hundreds of cycles a day, that soil movement is the root cause behind a lot of “bad sensor” complaints.
Short answer: yes, heat and UV are a big part of it. North Texas summers push past 105°F, and direct sun on a south-facing gate post degrades photocell lenses, wiring insulation, and nylon rollers faster than rated cycle counts would predict. The cell doesn’t fail completely. It drifts, then trips entrapment faults in the afternoon heat. Replacement is usually $150-$350 per photocell pair. If it’s happening every summer, we’ll also check for post movement making the alignment marginal.
That’s usually the Blackland Prairie doing what it does. A heavy rain swells the clay, a post shifts, the rack and pinion bind, and the motor pulls enough current to smoke a capacitor or a control board. The grinding was the rack binding. The death was the board giving up. We see it on FAAC and Viking slide gates all over Addison after wet weeks. We can replace the failed board and adjust the rack, but if the post has moved, we’ll also re-set it or the same failure comes back. Call us at (936) 296-2568 for a free on-site look.
Call Gatewood Fence & Gate for Gate Access Control in Addison
If you’ve got a gate down in Addison, or one that’s acting up and making residents angry, call Hal Gatewood at (936) 296-2568. You’ll get a live person, an honest assessment, and a written price before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Addison since 2001.