Gate Realignment in University Park, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in University Park, TX

Gate realignment in University Park typically costs between $180 and $450 depending on the severity of the sag and whether we need to perform on-site welding to reinforce the hinge posts-see our How Much Does Gate Repair Cost? (2026 Price Guide) - University Park, TX for more details. Most of our realignment jobs are completed in a single visit, often the same day you call, because we know a gate that drags or refuses to latch isn’t just a nuisance-it’s a security risk for your property.

If your gate is scraping the driveway or missing the latch, you don’t need a new gate. You need someone who understands that a gate sags in the hinge post, not in the middle. At Gatewood Fence & Gate, we’ve been fixing these issues since 2001. We don’t haul your gate off to a shop or try to sell you a brand-new system you don’t need. I show up, I assess the structural integrity of your posts, and I fix the alignment right there in your driveway. If you are looking for Gate Repair in University Park that focuses on making things work again rather than replacing them, you have found the right place.

We believe in doing the job once and doing it right. Every repair I perform is backed by our 90-Day Done Right Promise. If it isn’t hanging straight or latching smooth within those 90 days, you call me, and I come back to make it right. It’s that simple. We are locally owned and owner-operated, and when you call (936) 296-2568, you aren’t getting a call center or a chatbot-you are getting a live person, 24 hours a day, 7 days a week.

When You Need Gate Realignment

You can usually tell when a gate needs alignment before it stops working entirely. In University Park, our clay-heavy soil can shift during the wet spring months, causing fence posts to lean even slightly. That small lean is magnified at the end of the gate, leading to big problems. Here are the most common signs that it is time to call us:

• The gate drags on the driveway: If you see a fresh scrape mark on your concrete or pavers, your hinge posts are likely pulling inward or sinking. This is the most common reason we get called out.
• The latch misses the catch: When the gate no longer clicks into place, it usually means the frame has shifted or the hinge pins are worn. This leaves your yard unsecured, which is a major concern for pet owners and parents.
• The gate makes a grinding noise: If you hear metal on metal or a scraping sound when opening, the hinges are under immense stress. We often find that ignoring this leads to broken welds or snapped hinges, which are much harder to fix later.
• Uneven gaps at the top or bottom: If the gap between the gate and the post is wider at the top than the bottom, the gate is racking. This puts uneven pressure on your motor, whether you are running a Viking or a Linear system.
• The gate motor struggles to close: If your opener has to work harder than usual to pull the gate shut, the alignment is likely the culprit. Forcing the motor to compensate for a dragging gate will burn out your control board or gears prematurely.

If you notice any of these signs, don’t wait for the gate to fail completely. A misaligned gate puts unnecessary strain on the entire system. Give us a call at (936) 296-2568 for a free estimate, and I’ll come take a look.

Our Gate Realignment Process

When I arrive at your home in University Park, I don’t start by guessing. I start by watching the gate operate. I need to see exactly where the binding happens and how the posts react under the weight of the gate. Here is how I approach every realignment job:

1. Structural Assessment: I inspect the hinge posts first. If the post is concrete-set and has shifted, we have to address the foundation issue before we touch the gate itself. Fixing the panel without fixing the post means you will be calling me again in six months, and that is not how we do business.
2. Hinge and Hardware Inspection: I check every hinge pin and mounting bolt. Often, the realignment is as simple as replacing worn-out hardware or tightening mounting brackets. If the hinges are seized or bent, I replace them on the spot.
3. On-Site Welding: This is where we differ from the big outfits. If the steel frame has twisted or the hinge plate has ripped away from the post, I weld it back into place right there in your driveway. I bring the equipment with me so we don’t have to haul your gate away.
4. Gate Racking Correction: If the gate has lost its square, I use bracing techniques to pull the frame back into alignment. This ensures the gate hangs level and closes smoothly without putting extra weight on the motor.
5. Motor Calibration: Once the physical alignment is perfect, I check the gate opener. If you have a DoorKing or Ghost Controls system, I ensure the limit switches are set correctly so the motor isn’t forcing the gate into the latch.
6. Final Testing: I cycle the gate multiple times to ensure it latches properly and clears the driveway ground. I don’t leave until I am satisfied that the work meets our 90-Day Done Right Promise.

Safety is a priority when working with heavy steel gates. These systems can weigh hundreds of pounds, and the tension on springs or hinges can be dangerous if handled incorrectly. If you notice your gate is leaning heavily or the hinges look compromised, please keep children and pets away from the area and call a professional to handle the repair. We have been doing this for over 29 years, and we have the equipment and experience to do it safely.

Gate Realignment Pricing in University Park

We believe in upfront pricing. You will never be surprised by an invoice at the end of a job. While every gate is unique, we can provide clear expectations on what you should budget for a realignment in the University Park area-check our How Much Does Gate Repair Cost in Dallas, TX? (2026 Price Guide) for local pricing.

We do not have a trip charge for customers inside the county. We also offer $40 off any repair over $200, and if you are a senior or a veteran, you get a permanent 10% discount on our services. If you have a written estimate from another company, I am happy to provide a free second opinion. Often, I find that what others call a “total replacement” is just a realignment and a solid weld job. Call us at (936) 296-2568 to get an honest assessment of what your gate actually needs.

FAQs - Gate Realignment

How much does it cost to fix a sagging gate in University Park?

Gate realignment typically ranges from $180 to $450, depending on whether we need to perform welding or replace structural hinges. We provide upfront pricing before we start any work, so you know exactly what the cost will be. Call (936) 296-2568 for an exact quote.

Can you fix a gate that drags on the ground without replacing it?

Yes, most dragging gates can be fixed by realigning the hinge posts or welding the frame back into square. We prioritize repair over replacement, and we have the tools to perform these repairs right in your driveway. If your gate is dragging, call us to schedule a visit.

Is it better to repair an old gate or replace it entirely?

Most of the time, a gate that is structurally sound but sagging can be repaired for a fraction of the cost of a new installation. We will always give you an honest answer; if your gate is beyond repair, I will tell you, but I won’t try to sell you a new one if a good weld and a hinge adjustment will keep it running for another decade.

Do you offer same-day service for gate repairs?

We do our best to accommodate same-day requests, especially when a gate is stuck open and creates a security concern for your home. Because we are locally owned and owner-operated, we don’t have to wait for dispatch approval from a corporate office. Call (936) 296-2568 to see if we can get to your property today.

If you are tired of dealing with a gate that doesn’t close or drags every time you pull into your driveway, it is time to call someone who will actually show up. We have been serving this community since 2001, and we stand by our work with a written promise. We are ready to help you get your gate back in working order through our Gate Repair services. Call (936) 296-2568 today for a free estimate and talk directly to the person who will be doing the work.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving University Park.